-
- The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
- Next Generation Ergonomics and Features
- High-Strength Reinforced Polymer Construction
- The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
- Picatinny/STANAG Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System (LBRS™)
- Stainless Steel Drop-In Rear Rail Module (RRM™)
- Hardened Pins for LBRS™ and RRM™
- Complete Finishing Jig, Drill bits
- Patent Pending
-
- The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
- Next Generation Ergonomics and Features
- High-Strength Reinforced Polymer Construction
- The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
- Picatinny/STANAG Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System (LBRS™)
- Stainless Steel Drop-In Rear Rail Module (RRM™)
- Hardened Pins for LBRS™ and RRM™
- Complete Finishing Jig, Drill bits
- Patent Pending
-
- The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
- Next Generation Ergonomics and Features
- High-Strength Reinforced Polymer Construction
- The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
- Picatinny/STANAG Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System (LBRS™)
- Stainless Steel Drop-In Rear Rail Module (RRM™)
- Hardened Pins for LBRS™ and RRM™
- Complete Finishing Jig, Drill bits
- Patent Pending
-
- The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
- Next Generation Ergonomics and Features
- High-Strength Reinforced Polymer Construction
- The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
- Picatinny/STANAG Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System (LBRS™)
- Stainless Steel Drop-In Rear Rail Module (RRM™)
- Hardened Pins for LBRS™ and RRM™
- Complete Finishing Jig, Drill bits
- Patent Pending
-
- The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
- Next Generation Ergonomics and Features
- High-Strength Reinforced Polymer Construction
- The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
- Picatinny/STANAG Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System (LBRS™)
- Stainless Steel Drop-In Rear Rail Module (RRM™)
- Hardened Pins for LBRS™ and RRM™
- Complete Finishing Jig, Drill bits
- Patent Pending
-
- The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
- Next Generation Ergonomics and Features
- High-Strength Reinforced Polymer Construction
- The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
- Picatinny/STANAG Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System (LBRS™)
- Stainless Steel Drop-In Rear Rail Module (RRM™)
- Hardened Pins for LBRS™ and RRM™
- Complete Finishing Jig, Drill bits
- Patent Pending
-
The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.
-
The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.
-
The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.
-
The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.
-
The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.
-
The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.
-
Polymer 80 has released their new Serialized Stripped PFS9™ Standard Frame for Glock® 17/22 models. The PFS9™ Standard Frame comes equipped with 17-round capacity, as well as advanced features and ergonomics traditionally reserved for aftermarket modifications. It’s a perfect option for your next competition or duty setup. The PFS9™ comes stripped and ready for assembly and customization with parts of the builder’s choice! The frame is made with high-strength reinforced polymer, providing a sturdy frame for multiple applications.
-
The Lower Part Kit includes- For G17 and Polymer 80 – The kits do not include a locking block.
357 – Glock OEM Trigger with Trigger Bar
322 – Glock OEM Trigger Mechanism Housing with Ejector
343 – Glock OEM 5LB. Trigger Connector
350 – Glock OEM Trigger Spring
7496 – Glock OEM Extended Slide Release Lever
1981 – Glock OEM Extended Magazine Release
280 – Glock OEM Magazine Release Spring
301 – Glock OEM Slide Lock
420 – Glock OEM Trigger Pin
4368 – Glock OEM Locking Block Pin
5446 – Glock OEM Slide Lock Spring
427 – Glock OEM Trigger Housing PinThe Upper Parts Kit Includes- all parts are Glock OEM.
Recoil Spring (01533)
Channel Liner (01148)
Extractor (01895)
Firing Pin Safety & Spring (00077)
Slide Cover Plate (00133)
Extractor Depressor Plunger (00112)
Extractor Depressor Plunger Spring (33522)
Spring Loaded Bearing (02714)
Firing Pin (00049)
Firing Pin Spring (00063)
Spacer Sleeve (00056)
Firing Pin Spring Cups (00070) -
Factory OEM Glock parts included in this kit:
SP00357 – Glock OEM Trigger with Trigger Bar
SP00322 – Glock OEM Trigger Mechanism Housing with Ejector
SP00343 – Glock OEM 5LB. Trigger Connector
SP00350 – Glock OEM Trigger Spring
SP02919 – Glock OEM Standard Slide Release Lever
SP00287 – Glock OEM Magazine Release
SP00280 – Glock OEM Magazine Release Spring
SP00301 – Glock OEM Slide Lock
SP00420 – Glock OEM Trigger Pin
SP04368 – Locking Block Pin
SP05446 – Slide Lock Spring -
Rock Slide USA .40 S&W Cal Upper for Glock 27. Model RS1SC40. OD Green Cerakote finish. Fits Polymer80 PF940SC lower and any other 26/27/33 Gen3 or Gen4 lower.
-
Stainless Steel Pistol Slide for Glock 27 .40 Cal Gen3–4 Stripped Blank. No markings. Working stripped slide as is or customize to your liking. Takes standard Glock parts, barrel, sights, etc. for Glock lower, or Polymer80 PF940SC.
-
Rock Slide USA .40 S&W CAL Upper for Glock 27. Model RS1SC40-RMR. OD Green Cerakote finish. Fits Polymer80 PF940SC lower and any other 26/27/33 Gen3 or Gen4 lower. Cutout for a Trijicon RMR.
-
Rock Slide USA .40 S&W Cal Upper for Glock 27. Model RS2SC40. Black Cerakote finish. Fits Polymer80 PF940SC lower and any other 26/27/33 Gen3 or Gen4 lower.
-
Kit Includes:
PF-Series 17-4 PH Stainless Steel Striker, 9mm Extractor (Available in Black or Bronze), Extractor Depressor, and Striker Safety
PF-Series 6061-T6 Aluminum Cover Plate
PF-Series Stainless Steel 5.5lb Striker Spring, Extractor Depressor Plunger Spring, and Striker Safety Spring
PF-Series Striker Channel Liner, Striker Spacer Sleeve, Striker Spring Cups (2), and Extractor Depressor Plunger Bearing (Available in Red or Gray) -
The Zev Technologies Upper Parts Kit for 9mm Gen ¾ Glock is a practical product for a weapon owner. All of the mechanisms that are needed to build an upper assembly are included with this bundle. The process of using this product is easy because all of the components are specifically designed for a traditional Glock gun. Constructed of a highly durable material, there is no danger of rust when used in a wilderness situation.
-
Firing Pin Assembly for all Glock 9mm and .380 pistols Gen1–4 excluding G43 & G42. New unbranded upper part.
-
For Glock Gen 1- 3 G17 Upper Slide Parts Kit 9 milimeter Genuine Glock OEM Parts
-
Rock Slide USA .40 S&W CAL Upper For Glock 27. Model RS2SC40. Burnt Bronze Cerakote finish. Fits Polymer80 PF940SC lower and any other 26/27/33 Gen3 or Gen4 lower.
-
Nomad Defense Stainless Steel Guide Rod for full-size Glock 17 and Glock 34 Gen 4/5 with ISMI 15# Recoil Spring
INCLUDES:
QPQ Nitride Coated Stainless Steel Guide Rod
Gen 4 Captured Rod Adapters
15lb ISMI Recoil Spring
– – – – –
Made in the USA -
Upper Slide Parts Kit for Glock 17 Pistols Gen1–3 with Stainless Recoil Spring.
-
2D Combat upper parts kits are a drop in solution to upgrade or complete your Glock pistol build. Each kit is comprised of high quality 17-4 stainless steel highly polished components, premium grade ISMI performance springs and essential OEM Glock polymer parts.
-
Upper Slide Parts Kits for Glock Pistols Gen1–3 G19 with Stainless Steel Guide Rod.
-
Guide Rod Recoil Spring for Glock Models 17, 22, and 31. Gen1–3 Factory Weight 17lb.
-
Firing Pin Assembly for Glock 43 9mm G43 Factory OEM Part.
-
Glock SP02457 OEM Recoil Spring Assembly Compact for Gen3 19, 23, & 32 models
-
Glock OEM Gen3 Factory Guide Rod Recoil Spring Assembly Glock 17 22 24 31 34 SP01533.
-
Guide Rod Recoil Springs for Glock Models 19, 23, and 32. Gen1–3 Factory Weight 18lb.
-
Stainless Steel Recoil Guide Rod for Glock 19,17, 22, 23, 31, 32 Gen3. Works with factory or any aftermarket Glock recoil springs. Spring is not included, Rod comes with washer and cap as pictured.
-
Rock Slide USA Pistol Stripped Upper .40 Cal. Compatible with Gen3 Glock 19/23 Lowers. Burnt Bronze Cerakote finish. Cut for a Trijicon RMR optic. Comes with mounting screws and tool.
-
Rock Slide USA Pistol Stripped Upper .40 Cal. Compatible with Gen3 Glock 19/23 Lowers. OD Green Cerakote finish. Cut for a Trijicon RMR optic. Comes with mounting screws and tool.
-
Rock Slide USA Pistol Stripped Upper 9mm Compatible with Glock 19 Gen3 Lowers and Polymer80. Burnt Bronze Cerakote finish. Takes standard Glock 19 parts and barrels. Cut for a Vortex Venom optic.
-
Rock Slide USA Pistol Stripped Upper .40 S&W Cal Compatible with Glock 23 or 19 Gen3 Lowers and Polymer80. Burnt Bronze Cerakote finish. Takes standard Glock 23 parts and barrels. Cut for a Vortex Venom optic.
-
Rock Slide USA Pistol Stripped Upper .40 S&W CAL Compatible with Glock 23 or 19 Gen3 Lowers and Polymer80. Tungsten Cerakote finish. Takes standard Glock 23 parts and barrels. Cut for a Vortex Venom optic.
-
Rock Slide USA Pistol Stripped Upper .40 S&W Cal. Compatible With Glock 23 or 19 Gen3 Lowers and Polymer80. Flat Dark Earth Cerakote finish. Takes standard Glock 23 parts and barrels. Cut for a Vortex Venom optic.
-
Rock Slide USA Pistol Stripped Upper .40 S&W Cal Compatible with Glock 23 or 19 Gen3 Lowers and Polymer80. OD Green Cerakote finish. Takes standard Glock 23 parts and barrels. Cut for a Vortex Venom optic.
-
Rock Slide USA Pistol Stripped Upper .40 Cal. Compatible with Gen3 Glock 19/23 Lowers. Tungsten Cerakote finish. Cut for a Trijicon RMR optic. Comes with mounting screws and tool.
-
Rock Slide USA Pistol Stripped Upper .40 Cal. Compatible with Gen3 Glock 19/23 Lowers. Flat Dark Earth Cerakote finish. Cut for a Trijicon RMR optic. Comes with mounting screws and tool.
-
Complete Upper with barrel and lower parts kit. 9mm. Black Nitride finish on barrel and slide. Compatible With Gen3 Glock 19/23 Lowers. All internal parts installed. Cutout for a Trijicon RMR optic.
The items included in the lower parts kit are as follows:
- Magazine Catch Spring
- Magazine Release
- Trigger Housing Pin
- Locking Block Pin
- Slide Lock, Slide Lock Spring
- Slide Stop Lever with Spring
- Trigger Housing with Ejector
- Connector
- Trigger Spring
- Trigger with Trigger Bar
- Trigger Pin
-
Complete Upper with black barrel and lower parts kit. 9mm. Made in the USA by Rock Slide USA. Compatible with Gen 3 Glock 19/23 Lowers. All internal parts installed. Cutout for a Vortex Venom optic with matching cover plate installed. OD Green Cerakote finish.
The items included in the lower parts kit are as follows.
- Magazine Catch Spring
- Magazine Release
- Trigger Housing Pin
- Locking Block Pin
- Slide Lock, Slide Lock Spring
- Slide Stop Lever with Spring
- Trigger Housing with Ejector
- Connector
- Trigger Spring
- Trigger with Trigger Bar
- Trigger Pin
-
Complete Upper with stainless steel barrel and lower parts kit. 9mm. Black Nitride finish. Compatible with Gen3 Glock 19/23 Lowers. All internal parts installed. Cutout for a Trijicon RMR optic.
The items included in the lower parts kit are as follows:
- Magazine Catch Spring
- Magazine Release
- Trigger Housing Pin
- Locking Block Pin
- Slide Lock, Slide Lock Spring
- Slide Stop Lever with Spring
- Trigger Housing with Ejector
- Connector
- Trigger Spring
- Trigger with Trigger Bar
- Trigger Pin
-
- Custom Cut Glock 19 slide (will also fit Glock 23 lowers) with full cutouts and serrations with RMR sight cutout
- Nitride steel match grade
- OEM Glock internal parts
- Guide Rod and Spring
- Does not come with front or rear sight
- Cerakoted in Tungsten Grey
- Fits Gen 1–3
-
Comes with the below items
custom cut glock 19 slide -( will also fit glock 23 lowers) with full cutouts and serrations with RMR sight cutout
Nitride steel match grade
OEM GLOCK internal parts
Guide rod and spring
does not come with front or rear sight
Cerakoted in tungsten grey
FITS GEN 1,2, and 3 -
Complete Kits for a Complete Build
A JSD Glock 80% lower parts kit that fits Glock firearms is part of the ultimate DIY handgun solution. We have the parts you need to build a firearm with a few simple tools and straightforward instructions.Included in this kit:
Trigger
Trigger Spring
Trigger Housing
Trigger Pin
Trigger Bar
Slide Lock
Slide Lock Spring (PF940v2, PF940C)
Locking Block Pin
Slide Stop
Magazine Catch Spring
Magazine Catch
By assembling these components from our Glock parts kits as part of your frame, you’ll have a fully functional firearm without the hurdles of a background check or government fees. Your personally built weapon also won’t require a serial number, making it the perfect solution when privacy is a priority. -
Glock Compatible Slide Completion Kit
Complete and upgrade your slide components with this high-quality Glock compatible slide completion kit. They’re perfect for an upgrade or for completing your Polymer80 build. Gun engineering doesn’t get much better than this semi-automatic pistol. And you have full control over the engineering process when you build your own gun!Nothing Beats a Great Design
The Glock design is manufactured with only 34 component parts. As one of the four primary parts on a semi-automatic pistol, the slide is interchangeable between different Glock compatible models. This is a major convenience when customizing your firearm. Thanks to tighter legislation and increasing issues of buying a gun the traditional way, more gun owners than ever are taking a DIY approach to owning a firearm and completing their slide assembly with our Glock slide completion kits. It is a testament to the simplicity of this pistol design and allows for greater quality control since you, as the gun owner, are putting your own effort into creating it yourself!What’s Included
The slide is the upper portion of a semi-automatic pistol that chambers ammunition into the barrel and extracts the spent casing after the round is fired. These parts will finish out your stripped Glock G26, G19, or G17 compatible slide. Our slide completion kit includes all of the small internal parts needed to complete your slide assembly. This Glock slide parts kit includes:Striker
Cover Plate
Extractor
Channel Liner
Striker Spacer Sleeve
Spring Cups
Striker Spring
Plunger
Plunger Spring
Bearing -
The midsize 9mm is versatile compared to a standard-sized pistol thanks to its reduced dimensions. Not only is it a conventional service weapon, but it is also ideal for concealed or open carry. Find a quality G19 compatible barrel for your DIY gun at JSD Supply with no serial number, background check, or registration!
Nitride Barrel Specifications
4150 Steel – A high-carbon alloy that includes chromium, manganese, and molybdenum. It is heat-treated to make it suitable for machining. Only the best steel is used for durability, longevity, and accuracy.
1:10 Button Rifling – on the G19 compatible barrel features a 10-inch twist per revolution.
Drop-in Replacement – The ability to take your G19 to the next level.
9mm – caliber nitride barrel is compatible with the G19.
Nitride Coating – Is a coating made from hard ceramic and applied to precision metal parts. It improves the substrate’s surface properties. -
The Patmos Arms Judah 26 slide is G26 compatible. The slide moves during the operating cycle and houses the firing pin as well as the extractor. This slide’s impressive design offers a real advantage for users. It allows them to do a fast press check, before and after firing. A user’s weak hand can use the front and rear serrations to grip the slide and move it to the rear until the chamber is in clear view. When done correctly, this ensures that a round is properly chambered without the hand getting anywhere near the muzzle of the pistol.
-
This complete PF940v2 kit has everything you need to build your own 80% PF940v2 full-size pistol, including Patmos Arms slide and internals, minus the frame. The PF940v2 is the industry’s first 80% pistol frame that offers compatibility with 9mm G17 components. This full build kit is suited for completion of an 80% Glock 17 compatible pistol that will feel and function like you bought it from a supplier.
-
Patmos Arms Judah 17 G17 Compatible Slide
This G17 slide is Glock compatible and precision machined from 4140 heat-treated steel for a drop-in fit. Slides are shipped with no internal components and ready for standard factory replacement parts or a variety of aftermarket performance parts (including sights).Well Known In The Industry
Our Patmos Arms Judah series of slides are made with exact tolerances and dimensions. They’re manufactured and machined by pre-programmed computer software with precision in mind. They are skillfully designed for both form and function with everyday gun carrying in mind.About The Slide
Your new G17 compatible slide can give your shooting confidence the boost it needs. If you’ve been looking for the perfect option to add on to your gun or you want to enhance the experience, this is the slide for you. Our G17 custom slide will help make you and your new trusty sidekick more accurate than ever. We know that every great homemade gun starts with a reliable 80% lower receiver. This is the perfect upper half to complement your Polymer80 PF940 or PF940v2 frame.Choose from several options to customize your internals, sight cut, and barrel while creating a completely personalized slide. This Patmos Arms Glock compatible slide features the following:
100% CNC Machined from Bar Stock
416 Stainless Steel Heat Treated
Nitride Coated
Front and Rear Serrations -
G19 Slide – Judah 19
Build a firearm that looks, feels, and operates like a stock Glock G19 without the hassles of traditional retailers and paperwork with parts by JSD. This component can be ordered with a match grade nitride barrel, complete slide internals, guide rod, and sights.G19 Slide Features:
100% CNC machined from bar stock
416 Stainless Steel – Heat Treated
Nitride coated
Front and rear serrations
Barrel Features:
Match Grade
Nitride Coated
9mm -
Patmos Arms Judah 27
Build a firearm that looks, feels, and operates like a stock Glock G27 without the hassles of traditional retailers and paperwork with parts by JSD. This component can be ordered with a match grade nitride barrel, complete slide internals, guide rod, and sights.27 Slide Features:
100% CNC machined from bar stock
416 Stainless Steel
Nitride coated
Front and Rear Serrations -
Glock G43 Compatible Slide
Features
100% CNC Machined from Bar Stock
4140 Heat Treated Steel
Black Nitride Coating
Front and Rear Serrations
9mm
Options
Slide Internals
Barrel -
Patmos Arms Revelation – Compact kit works with a G19 or a Polymer 80 PF940c. Custom design this firearm to best suit you. This build kit from JSD has everything needed to finish your own pistol like a professional, without the paperwork. Only firearms over 80% complete are recognized by the ATF and lawmakers as being guns. The Patmos Arms Revelation Compact kit is great for anyone who wants to own firearms off-the-books, is competent with basic tools, and has a safe place to build their gun.
Parts with this Patmos Arms Revelation – Compact include:
Patmos Arms Revelation 19 Slide
Cut for Trijicon RMR or Holosun 507 or similar red dot
Patmos Arms Cover plate
Patmos Arms Barrel
Patmos Arms Slide Parts kit and Recoil Rod
Black nitride coating
Complete Lower Parts Kit for a Polymer 80 PF940c
The complete PF940c parts kit is included, but the frame and jig will need to be purchased separately. -
The PF940c build kit works with a G19 or a Polymer 80 PF940c. Custom design this firearm to best suit you. This build kit from JSD has everything needed to finish your own pistol like a professional, without the paperwork. Only firearms over 80% complete are recognized by the ATFand lawmakers as being guns. The PF940c parts kit is great for anyone who wants to own firearms off-the-books, is competent with basic tools, and has a safe place to build their gun.
Parts with this PF940c build kit include:
Patmos Arms Judah 19 Complete Slide
Patmos Arms Barrel
Black nitride coating
Complete Lower Parts Kit for a Polymer 80 PF940c
The complete PF940c parts kit is included, but the frame and jig will need to be purchased separately. -
If you’ve been wanting to finish out a frame for a handgun that fits Glock compatible parts, then you need the PF940sc completion kit from JSD Supply. This completion kit comes with everything required to complete a G26 compatible firearm minus the frame. And if you want, we can even ship a polymer 80 PF940sc frame and jig directly to you, without the need for an FFL transfer.
Our PF940sc completion kit includes the following:
Patmos Arms Judah 26 Complete Slide – Made in the USA
Patmos Arms 26 Barrel – Made in the USA
Black Nitride 4150 steel
Complete Lower Parts Kit
This kit does not include the frame -
This complete PF940v2 kit has everything you need to build your own 80% PF940v2 full-size pistol, including Patmos Arms slide and internals, minus the frame. The PF940v2 is the industry’s first 80% pistol frame that offers compatibility with 9mm G17 components. This full build kit is suited for completion of an 80% Glock 17 compatible pistol that will feel and function like you bought it from a supplier.
Included With This Full Build Kit
This is a complete build kit that includes the following:Patmos Arms Judah 17 Complete Slide – Made in the USA
Patmos Arms G17 Barrel – Made in the USA
Black Nitride
Complete Lower Parts Kit
This kit does not include Polymer 80 PF940v2 frame and jig -
Complete Upper with black barrel and lower parts kit. 9mm. Made in the USA by Rock Slide USA. Compatible with Gen3 Glock 19/23 Lowers. All internal parts installed. Flat Dark Earth Cerakote finish. Cutout for a Vortex Venom optic with matching cover plate installed.
The items included in the lower parts kit are as follows.- Magazine Catch Spring
- Magazine Release
- Trigger Housing Pin
- Locking Block Pin
- Slide Lock, Slide Lock Spring
- Slide Stop Lever with Spring
- Trigger Housing with Ejector
- Connector
- Trigger Spring
- Trigger with Trigger Bar
- Trigger Pin
-
Rock Slide USA Complete Pistol Slide and barrel, Tungsten Cerakote finish. Works with 26/27 lowers and PF940SC. Complete with new internal parts and Stainless Steel barrel.
-
ADJUSTABLE SIGHTS
The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevationLAST ROUND LOCK OPEN
The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol.INTERNAL FIRING PIN SAFETY
Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm.FINISH
All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel.THE 10 SECOND INSTALLATION
Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. -
ADJUSTABLE SIGHTS
The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevationLAST ROUND LOCK OPEN
The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol.INTERNAL FIRING PIN SAFETY
Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm.FINISH
All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel.THE 10 SECOND INSTALLATION
Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. -
ADJUSTABLE SIGHTS
The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevationLAST ROUND LOCK OPEN
The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol.INTERNAL FIRING PIN SAFETY
Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm.FINISH
All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel.THE 10 SECOND INSTALLATION
Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. -
- Fits Polymer 80 models V1/V2 for comparable Glock models 17/19/22/23/31
- Comes with 2 Charging Handles (One for Glock slides and One for P80 slides)
- Equipped with the MCKGEN2 Stabilizer which shoots folded and locked
- Rear door extends an additional 15 degrees making it easier to insert and extract the handgun
- Accommodates suppressor height sights
- Suppressor friendly accommodating a suppressor up to 1.38” diameter
- Features an improved spare magazine holder that operates with a mag catch and magazine release button
- Compatible with the MCKGEN2 Brass Catcher
- Comes standard with polymer top Picatinny rail
-
- The next generation of Micro Roni is here! We improved our past generation models into the ultimate conversion kit. It’s Micro Roni Generation 4, and we call it Micro Conversion Kit, or simply MCK.
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body.
It is greatly improved from previous generations of the Micro Roni Stabilizer. Available for select Gen 3, 4, and 5 Glock models.
The extended stabilizer, which now comes standard, enables one-handed firing for better shooting performance. It also comes with a Velcro® strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards. MCK comes in two versions, one is a NON-NFA product (with standard long stabilizer brace), and the other is a NFA product (with stock).
- The next generation of Micro Roni is here! We improved our past generation models into the ultimate conversion kit. It’s Micro Roni Generation 4, and we call it Micro Conversion Kit, or simply MCK.
-
These are called BUILDERS Kits and not called “Assemble Kit” for a reason. You will need to file/sand/polish p80 frames/parts in order to make it work. Esp. for the subcompact, almost 100% of the time you will have to modify the locking block. If you are not capable of doing this then DO not buy these kits.
MDX Arms S1 Build Kit Contents:
- Polymer80 80% Frame Kit with Jig and tooling – PF940v2 (metal rails, newest version)
- Polymer Front and Rear Sights
- Lower Parts Kit (LPK) -OBVIOUSLY if the option says “none” this means its not included
- Slide Parts Kit (SPK)
- Match Grade Drop-In Barrel
- MDX Arms Series One Custom CNC Slide USA Made
- RMR Plate, Upgraded Ejector and LPK are Optional
- Channel Liner Installed.
-
Build Your Own Kit Includes:
- MDX G19 LF19 9mm Slide with RMR Cut (6-32 Screw Thread Pitch)
- Polymer Front and Rear Sights
- Complete Slide Parts Kit with Guide Rod (Channel Liner Installed)
- G19 Non Threaded Barrel in Stainless Steel or Black Nitride
- RMR Plate Not Included
- Compatible with Glock G19/Polymer80 PF940Cv1/Strike80 Frames
Optional:
- Threaded Barrel in Stainless Steel or Black Nitride
- Lower Parts Kit (LPK)
-
MDX Arms S1 Build Kit Contents:
- Polymer80 80% Frame Kit with Jig and tooling – PF940CV1 (metal rails, newest version)
- Polymer Front and Rear Sights
- Lower Parts Kit (LPK) -OBVIOUSLY if the option says “none” this means its not included
- Slide Parts Kit (SPK)
- Match Grade Drop-In Barrel
- MDX Arms Series One Custom CNC Slide USA Made
- RMR Plate, Upgraded Ejector and LPK are Optional
- Channel Liner Installed.
-
MDX Arms S1 Build Kit Contents:
- Polymer80 80% Frame Kit with Jig and tooling – PF940CV1 (metal rails, newest version)
- Polymer Front and Rear Sights
- Lower Parts Kit (LPK) -OBVIOUSLY if the option says “none” this means its not included
- Slide Parts Kit (SPK)
- Match Grade Drop-In Barrel
- MDX Arms Series One Custom CNC Slide USA Made
- RMR Plate, Upgraded Ejector and LPK are Optional
- Channel Liner Installed.
-
MDX Arms S1 Build Kit Contents:
- Polymer80 80% Frame Kit with Jig and tooling – PF940CV1 (metal rails, newest version)
- Polymer Front and Rear Sights
- Lower Parts Kit (LPK) -OBVIOUSLY if the option says “none” this means its not included
- Slide Parts Kit (SPK)
- Match Grade Drop-In Barrel
- MDX Arms Series One Custom CNC Slide USA Made
- RMR Plate, Upgraded Ejector and LPK are Optional
- Channel Liner Installed.
-
MDX Arms S1 Build Kit Contents:
- Polymer80 80% Frame Kit with Jig and tooling – PF940CV1 (metal rails, newest version)
- Polymer Front and Rear Sights
- Lower Parts Kit (LPK) -OBVIOUSLY if the option says “none” this means its not included
- Slide Parts Kit (SPK)
- Match Grade Drop-In Barrel
- MDX Arms Series One Custom CNC Slide USA Made
- RMR Plate, Upgraded Ejector and LPK are Optional
- Channel Liner Installed.
-
MDX Arms S1 Build Kit Contents:
- Polymer80 80% Frame Kit with Jig and tooling – PF940CV1 (metal rails, newest version)
- Polymer Front and Rear Sights
- Lower Parts Kit (LPK) -OBVIOUSLY if the option says “none” this means its not included
- Slide Parts Kit (SPK)
- Match Grade Drop-In Barrel
- MDX Arms Series One Custom CNC Slide USA Made
- RMR Plate, Upgraded Ejector and LPK are Optional
- Channel Liner Installed.
-
Build Your Own Kit Includes:
- MDX G26 V2 9mm Slide with RMR Cut (6-32 Screw Thread Pitch)
- Polymer Front and Rear Sights
- Complete Slide Parts Kit with Guide Rod (Channel Liner Installed)
- G26 Non Threaded Barrel in Stainless Steel or Black Nitride
- RMR Plate Not Included
- Compatible with Glock G26/Polymer80 PF940SC Frames
Optional:
- Lower Parts Kit (LPK)
-
PF45™ Large Frame The industry’s only 80% Large Polymer Pistol Frame offers our enhanced ergonomics and features. Built with high-strength reinforced polymer construction, the PF45™ comes with everything necessary to complete a Gen 3 Glock® 20/21SF-compatible pistol frame. It is available with our aggressive standard grip texture which also allows custom stippling and modification.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and End Mill Included
Compatible with Gen 3 Glock® 20/21SF Slide Assemblies
Compatible with Glock® 20/21SF Magazines
Patent Pending
Available colors: Black,
(coming soon sometime Feb. ) Flat Dark Earth, Olive Drab Green, Gray, Cobalt -
The PF320PTEX™ Grip Module is P80®’s first polymer grip designed for compatibility with SIG SAUER® components for P320™. Designed and manufactured in the U.S.A., the PF320PTEX™ Grip Modules are made with P80’s proprietary blend of high-strength reinforced polymer, and feature our next generation ergonomics for operators, law enforcement and civillian P320™ owners. Polymer80® products are known for aggressive enhancements to grip shape and angle, with features including:
- 1911 Grip Angle
- P80’s Signature PTEX™ Grip Texture
- High Beaver Tail Undercut for Better Bore Access
- Enhanced Double-Undercut Trigger Guard and Support Hand Contours
- Modified Proprietary Ambidextrous Magazine Release
PF320PTEX™ Grip Module is Compatible with the following products:
- P320™ Full & Carry Slides
- P320 X5™ Full & Carry Slides,
- P320 VTac™ Slides. Enhanced Grip Shape & Angle
-
PF45™ Large Frame
The industry’s only 80% Large Polymer Pistol Frame offers our enhanced ergonomics and features. Built with high-strength reinforced polymer construction, the PF45™ compatible with Glock® G21SF components. It is available with our aggressive standard grip texture which also allows custom stippling and modification.
Product Overview:
- Enhanced Ergonomics and Features
- High-Strength Reinforced Polymer Construction
- Aggressive and Adaptable Grip Texture
- Picatinny/STANAG Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System (LBRS™)
- Stainless Steel Rear Rail Module (RRM™)
- Hardened Pins for LBRS ™ and RRM™
- Complete Finishing Jig, Drill bits and End Mill Included
- Compatible with Gen 3 Glock® G20SF/G21SF Slide Assemblies
- Compatible with Glock® G20SF/G21SF Magazines
- Patent Pending
PF45 Completion Kit Parts Includes the following parts:
- Connector
- Slide Stop Lever with Spring
- Locking Block Pin
- Magazine Catch
- Magazine Release Spring
- Slide Lock
- Trigger Housing with Ejector
- Trigger Pin
- Trigger Spring
- Trigger with Trigger Bar
Parts Included in this kit:
- Connector
- Slide Stop Lever with Spring
- Locking Block Pin
- Magazine Catch
- Magazine Release Spring
- Slide Lock
- Slide Lock Spring (Not in G20/21 Kit)
- Trigger Housing Pin (Not in G20/21 Kit)
- Trigger Housing with Ejector
- Trigger Pin
- Trigger Spring
- Trigger with Trigger Bar
-
Product Overview:
- Enhanced Ergonomics and Features
- High-Strength Reinforced Polymer Construction
- Aggressive and Adaptable Grip Texture
- Picatinny/STANAG Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System (LBRS™)
- Stainless Steel Rear Rail Module (RRM™)
- Hardened Pins for LBRS ™ and RRM™
- Complete Finishing Jig, Drill bits and End Mill Included
- Compatible with Glock Gen3 G26/G27 Components
- Patent Pending
-
Polymer80 is pleased to present the PF9SS™ 80% Subcompact Single Stack Frame. Offering compatibility with Glock® 43 Gen4 components, the PF9SS™ frame comes with an aggressive texture that emulates a stippled pattern, an extended beaver tail, double undercut trigger guard, and a thumb ledge. These features considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation. The PF9SS™ is a perfect build for “Everyday Carry” and comes with an embedded metal plate for those that wish to serialize their completed pistols.
Product Overview:
- Enhanced Ergonomics and Features
- High-Strength Reinforced Polymer Construction
- Aggressive and Adaptable Grip Texture
- Picatinny/STANAG Compliant Accessory Rail
- Blank Serialization Plate
- Stainless Steel Locking Block Rail System (LBRS™)
- Stainless Steel Rear Rail Module (RRM™)
- Hardened Pins for LBRS ™ and RRM™
- Complete Finishing Jig, Drill bits and End Mill Included
- Compatible with Glock G43 Gen3 Components
- Patent Pending
- *NEW Slide Lock Assembly
-
Complete Slide Includes:
- S1 Custom CNC Slide
- Complete Slide Parts Kit (Not Installed)
- Match Barrel
- Channel Liner Installed
- Sights and RMR Plate Covers Are Optional
-
Complete Slide Includes:
- S1 Custom 17-4PH SS CNC Slide
- Complete Slide Parts Kit (Not Installed)
- Match Barrel
- Front and Rear Sights
- Channel Liner Installed
- RMR Plate Covers Are Optional
-
- Machined from AZT 17-4PH Billet Stainless Steel Blanks
- Black Oxide finished for increased wear and corrosion resistance.
- Heat Treated to 36-40 on the Rockwell C Scale
- Deep Scallop Front and Rear Serration have been machined to enhance grip as well as aesthetics.
- Outlined Top and Side Ports offers weight reduction
- Center Outlined Pockets offers that unqiue look
- 45 Degree chamfered top edges to reduce weight and increase responsiveness.
- RMR Cut to a depth of .125″.
- Uses 6-32 Thread for RMR Screws – Not Included
- 2 front alignment posts incorporated into the RMR cut.
- Compatible with Gen3 G17 frames, Polymer80 Pf940V2 G17
- Channel Liners Installed
- Sights and RMR Plate Cover available at an additional cost.
- Professional gunsmith assembly recommended.
-
MDX Arms S1 Build Kit Contents:
- Polymer Front and Rear Sights
- Lower Parts Kit (LPK) -OBVIOUSLY if the option says “none” this means its not included
- Slide Parts Kit (SPK)
- Match Grade Drop-In Barrel
- MDX Arms Series One Custom CNC Slide USA Made
- RMR Plate, Upgraded Ejector and LPK are Optional
- Channel Liner Installed.
-
Complete Slide Includes:
- S1 Custom 17-4PH SS CNC Slide
- Complete Slide Parts Kit (Not Installed)
- Match Barrel
- Channel Liner Installed
- RMR Plate Covers Are Optional
-
Featuring MDX Arms Series One Custom CNC Slide for your G19. Perfect slide to complete your Polymer80 frame.
- Machined from AZT 17-4PH Billet Stainless Steel Blanks
- Black Oxide finished for increased wear and corrosion resistance.
- Heat Treated to 36-40 on the Rockwell C Scale
- Deep Scallop Front and Rear Serration have been machined to enhance grip as well as aesthetics.
- Outlined Top and Side Ports offers weight reduction
- Center Outlined Pockets offers that unqiue look
- 45 Degree chamfered top edges to reduce weight and increase responsiveness.
- RMR Cut to a depth of .125″.
- Uses 6-32 Thread for RMR Screws – Not Included
- 2 front alignment posts incorporated into the RMR cut.
- Compatible with Gen3 G19 frames, Polymer80 Pf940CV1 G19
- Channel Liners Installed
- Sights and RMR Plate Cover available at an additional cost.
- Professional gunsmith assembly recommended.
-
- Strike Industries’ ARK G17 Barrel for GLOCK™ is a spiral fluted barrel that provides a union between match grade performance with unsurpassed reliability, reduction in weight without sacrificing any accuracy or durability. From the pre-hardened 416 premium grade stainless steel to the extreme tolerances of exact details and contours, the barrel is corrosion resistant with high tensile strength, The ARK G17 Barrel for GLOCK is not only a premium upgrade to your G17, it is the ultimate performance enhancer and the highlight of any G17 builds.The ARK G17 Barrel for GLOCK is a prime example of aesthetics, performance, and function, all qualities we strive for here at Strike Industries.
Chambering: 9mm
Material: pre-Hardened 416R Stainless Steel
Finishing: Black Nitride
Rifilng: 1:10 6-Groove rifling with precision crownFeaturing a polished feed ramp for reliable loading and ejecting
- Strike Industries’ ARK G17 Barrel for GLOCK™ is a spiral fluted barrel that provides a union between match grade performance with unsurpassed reliability, reduction in weight without sacrificing any accuracy or durability. From the pre-hardened 416 premium grade stainless steel to the extreme tolerances of exact details and contours, the barrel is corrosion resistant with high tensile strength, The ARK G17 Barrel for GLOCK is not only a premium upgrade to your G17, it is the ultimate performance enhancer and the highlight of any G17 builds.The ARK G17 Barrel for GLOCK is a prime example of aesthetics, performance, and function, all qualities we strive for here at Strike Industries.
-
Strike Industries’ ARK G19 Barrel for GLOCK™ is a spiral fluted barrel that provides a union between match grade performance with unsurpassed reliability, reduction in weight without sacrificing any accuracy or durability. From the pre-hardened 416 premium grade stainless steel to the extreme tolerances of exact details and contours, the barrel is corrosion resistant with high tensile strength, The ARK G19 Barrel for GLOCK is not only a premium upgrade to your G19, it is the ultimate performance enhancer and the highlight of any G19 build. The ARK G19 Barrel for GLOCK is a prime example of aesthetics, performance, and function, all qualities we strive for here at Strike Industries. Proudly made in America.
Product Spec:
Chambering: 9mm
Material: pre-Hardened 416R Stainless Steel
Finishing: Black Nitride
Rifilng: 1:10 6-Groove rifling with precision crownFeatures:
– Polished feed ramp for reliable loading and ejecting.Compatablity:
– GEN3-5 -
- Titanium nitride (TiN) plated for increased wear resistance.
- The TiN plating also gives the barrel an attractive gold finish.
- CNC Machined on state of the art equipment.
- Compatible with 3rd & 4th Gen G19’s.
- Tighter barrel lock up.
- 4″ barrel length.
- 1/2×28 Threaded Pitch – Does not come with threaded protector
- Manufactured from premium U.S. made 416R stainless steel bar-stock.
- Gas vacuum heat-treated and double-tempered to mitigate stress.
- Broach cut rifled in 1:16LH twist for improved accuracy, and the ability to shoot lead (non-jacketed) projectiles
-
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
-
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
-
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
-
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
-
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
-
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
-
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
-
MDX Arms ZEV Technologies Barrel Replacement Glock 17, Dimpled, Supp. Threaded (1/2×28) Burnt Bronze
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
-
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
-
Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.