-
Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. Customers can choose between two different grip styles: the standard grip texture or ReadyMod® grip providing a blank canvas for customization. Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and Included
Compatible with Glock® 19/23 Gen3 Components
Patent Pending -
Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. Customers can choose between two different grip styles: the standard grip texture or ReadyMod® grip providing a blank canvas for customization. Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and Included
Compatible with Glock® 19/23 Gen3 Components
Patent Pending -
Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. Customers can choose between two different grip styles: the standard grip texture or ReadyMod® grip providing a blank canvas for customization. Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and Included
Compatible with Glock® 19/23 Gen3 Components
Patent Pending -
Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. Customers can choose between two different grip styles: the standard grip texture or ReadyMod® grip providing a blank canvas for customization. Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and Included
Compatible with Glock® 19/23 Gen3 Components
Patent Pending -
Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. Customers can choose between two different grip styles: the standard grip texture or ReadyMod® grip providing a blank canvas for customization. Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and Included
Compatible with Glock® 19/23 Gen3 Components
Patent Pending -
MDX Arms Strike Industries PF940CV1 80% Frame Textured for Gen3 Glock 19 / Glock 23 / Glock 32 Black
Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. Customers can choose between two different grip styles: the standard grip texture or ReadyMod® grip providing a blank canvas for customization. Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and Included
Compatible with Glock® 19/23 Gen3 Components
Patent Pending -
Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. Customers can choose between two different grip styles: the standard grip texture or ReadyMod® grip providing a blank canvas for customization. Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and Included
Compatible with Glock® 19/23 Gen3 Components
Patent Pending -
Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. Customers can choose between two different grip styles: the standard grip texture or ReadyMod® grip providing a blank canvas for customization. Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and Included
Compatible with Glock® 19/23 Gen3 Components
Patent Pending -
MDX Arms Strike Industries PF940CV1 80% Frame Textured for Gen3 Glock 19 / Glock 23 / Glock 32 Green
Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. Customers can choose between two different grip styles: the standard grip texture or ReadyMod® grip providing a blank canvas for customization. Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig, Drill bits and Included
Compatible with Glock® 19/23 Gen3 Components
Patent Pending -
Ergonomics Meets Customization
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling – the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.
-
Ergonomics Meets Customization
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling – the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.
-
Ergonomics Meets Customization
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling – the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.
-
Ergonomics Meets Customization
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling – the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.
-
Ergonomics Meets Customization
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling – the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.
-
Magazine Catch Spring for Glock. Fits All Models. 2 Springs.
-
The Polymer 80 Slide Parts Kit designed for the PF-Series of Glock style pistols comes with all the components you need to complete your slide. It comes with upgraded parts like the striker, extractor, depressor, and safety plunger which are machined from 17-4 PH stainless steel for long term durability and reliability. The cover plate is machined from 6061-T6 aluminum and the springs are made from heat treated stainless steel. All the polymer components come in red. Complete your build today with the Polymer 80 Slide Completion Parts Kit.
Fits:
- PF-Series
- Gen 1-4 Glock slides
Kit Includes:
-
- 17-4 PH Stainless Steel Striker and Striker Safety
- 17-4 PH Extractor and Extractor Plunger
- 6061-T6 Aluminum Cover Plate
- 5.5lb Striker Spring, Extractor Plunger Spring, Striker Safety Spring
- Channel Liner
- Striker Spacer Sleeve
- Spring Cups
Extractor Plunger Bearing
-
Glock SP02457 OEM Recoil Spring Assembly Compact for Gen3 19, 23, & 32 models
-
Guide Rod Recoil Springs for Glock Models 19, 23, and 32. Gen1–3 Factory Weight 18lb.
-
Stainless Steel Recoil Guide Rod for Glock 19,17, 22, 23, 31, 32 Gen3. Works with factory or any aftermarket Glock recoil springs. Spring is not included, Rod comes with washer and cap as pictured.
-
Complete Kits for a Complete Build
A JSD Glock 80% lower parts kit that fits Glock firearms is part of the ultimate DIY handgun solution. We have the parts you need to build a firearm with a few simple tools and straightforward instructions.Included in this kit:
Trigger
Trigger Spring
Trigger Housing
Trigger Pin
Trigger Bar
Slide Lock
Slide Lock Spring (PF940v2, PF940C)
Locking Block Pin
Slide Stop
Magazine Catch Spring
Magazine Catch
By assembling these components from our Glock parts kits as part of your frame, you’ll have a fully functional firearm without the hurdles of a background check or government fees. Your personally built weapon also won’t require a serial number, making it the perfect solution when privacy is a priority. -
Glock Compatible Slide Completion Kit
Complete and upgrade your slide components with this high-quality Glock compatible slide completion kit. They’re perfect for an upgrade or for completing your Polymer80 build. Gun engineering doesn’t get much better than this semi-automatic pistol. And you have full control over the engineering process when you build your own gun!Nothing Beats a Great Design
The Glock design is manufactured with only 34 component parts. As one of the four primary parts on a semi-automatic pistol, the slide is interchangeable between different Glock compatible models. This is a major convenience when customizing your firearm. Thanks to tighter legislation and increasing issues of buying a gun the traditional way, more gun owners than ever are taking a DIY approach to owning a firearm and completing their slide assembly with our Glock slide completion kits. It is a testament to the simplicity of this pistol design and allows for greater quality control since you, as the gun owner, are putting your own effort into creating it yourself!What’s Included
The slide is the upper portion of a semi-automatic pistol that chambers ammunition into the barrel and extracts the spent casing after the round is fired. These parts will finish out your stripped Glock G26, G19, or G17 compatible slide. Our slide completion kit includes all of the small internal parts needed to complete your slide assembly. This Glock slide parts kit includes:Striker
Cover Plate
Extractor
Channel Liner
Striker Spacer Sleeve
Spring Cups
Striker Spring
Plunger
Plunger Spring
Bearing -
- The next generation of Micro Roni is here! We improved our past generation models into the ultimate conversion kit. It’s Micro Roni Generation 4, and we call it Micro Conversion Kit, or simply MCK.
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body.
It is greatly improved from previous generations of the Micro Roni Stabilizer. Available for select Gen 3, 4, and 5 Glock models.
The extended stabilizer, which now comes standard, enables one-handed firing for better shooting performance. It also comes with a Velcro® strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards. MCK comes in two versions, one is a NON-NFA product (with standard long stabilizer brace), and the other is a NFA product (with stock).
- The next generation of Micro Roni is here! We improved our past generation models into the ultimate conversion kit. It’s Micro Roni Generation 4, and we call it Micro Conversion Kit, or simply MCK.
-
Rock Slide USA Vortex Venom Optic Cut Cover. Burnt Bronze Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Vortex Venom. Machined from aluminum.
-
Rock Slide USA Vortex Venom Optic Cut Cover. Flat Dark Earth Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Vortex Venom. Machined from aluminum.
-
Rock Slide USA RMR Cover Plate. Burnt Bronze Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Trijicon RMR. This will not fit a Vortex Venom cut slide. Vortex covers are available.
-
Rock Slide USA RMR Cover Plate. Tungsten Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Trijicon RMR. This will not fit a Vortex Venom cut slide. Vortex covers are available.
-
Rock Slide USA Vortex Venom Optic Cut Cover. OD Green Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Vortex Venom. Machined from aluminum.
-
Rock Slide USA Vortex Venom Optic Cut Cover. Pink Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Vortex Venom. Machined from aluminum.
-
Rock Slide USA RMR Cover Plate. Flat Dark Earth Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Trijicon RMR. This will not fit a Vortex Venom cut slide. Vortex covers are available.
-
Rock Slide USA Vortex Venom Optic Cut Cover. Tungsten Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Vortex Venom. Machined from aluminum.
-
Rock Slide USA RMR Cover Plate. Black Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Trijicon RMR. This will not fit a Vortex Venom cut slide. Vortex covers are available.
-
Rock Slide USA RMR Cover Plate. Pink Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Trijicon RMR. This will not fit a Vortex Venom cut slide. Vortex covers are available.
-
Rock Slide USA RMR Cover Plate. Unfinished aluminum, ready for Cerakote or the coating of your choice. Matches Rock Slide USA upper and will work on any slide that is cut for a Trijicon RMR. This will not fit a Vortex Venom cut slide. Vortex covers are available.
-
Rock Slide USA RMR Cover Plate. OG Green Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Trijicon RMR. This will not fit a Vortex Venom cut slide. Vortex covers are available.
-
Rock Slide USA Vortex Venom Optic Cut Cover. Black Cerakote finish. Matches Rock Slide USA upper and will work on any slide that is cut for a Vortex Venom. Machined from aluminum.
-
- Genuine OEM Glock replacement barrel.
- All barrels are Gen1-4
- 9/40/357/10 barrels are hexagonal profile with right hand twist
- 45ACP & 45 GAP are octagonal profile with right hand twist
- Part number 15 on the Glock Schematic.
- For factory compensated Glocks
- Genuine OEM Glock replacement barrel.
-
The Brownells Match-Grade Conversion Barrel enables you to switch your .40 S&W chambered Glock® 23 to shoot 9mm Luger (9x19mm) ammo AND also improve its accuracy potential at the same time. It fits Gen1 through Gen4 variants of the Glock® 23, and will be a drop-in install on most guns.
Each conversion barrel is machined from 416R stainless steel alloy to precise dimensions to ensure a tight lockup and long service life. Button-rifled with 1-10″ right-hand, 6-groove rifling that is compatible with inexpensive “practice” ammo that has non-jacketed bullets. The hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel.
-
- Genuine OEM Glock replacement barrel.
- All barrels are Gen1-4 (Glock 19 will fit Gen5 as well)
- 9/40/357/10 barrels are hexagonal profile with right hand twist
- 45ACP & 45 GAP are octagonal profile with right hand twist
- Part number 15 on the Glock Schematic.
-
The broad, flat face of the Polymer DAT Trigger permits a straight, uniquely self-correcting rearward press. Pre-travel has been reduced as much as possible without risking safety, so you revel in a clean, crisp break and almost non-existent overtravel. Most importantly, all of these benefits do not come at the expense of compromising reliable operation of the factory safeties.
- Drop-in ready for Gen1 thru Gen4 Glock® pistols
- WILL NOT fit Gen5 or G19X pistols
- Solid-body, molded hard-polymer trigger shoe & safety lever
- Flat-faced shoe enhances control & leverage
- Polished stainless steel OEM Glock trigger bar installed
- Models for standard (9mm, .40 & .357 SIG) and large frame (.45 ACP & 10mm Auto) pistols, plus separate models for the G36, G42 and G43
-
The Strike Industries Extended Magazine Plate For GLOCK G17 9MM / G22 .40CAL was designed to provide smoother magazine reloading through a slow drag / no snag design while maintaining maximum magazine capacity with any OEM GLOCK magazine. The Extended Magazine Plate provides an additional 6 rounds to any G17 GLOCK magazine in addition to adding plus 5 to any G22 .40 cal magazine.
-
Steel City Arsenal Slim Magwell Machined specifically to fitPolymer 80 PF940C Compact FramesThis Magwell is NOT Compatible with CL frames!!Works with Full Capacity and 10 rd Factory MagsPackage Includes:MagwellMounting ScrewHex Key -
Steel City Arsenal Slim Magwell Machined specifically to fitPolymer 80 PF940C Compact FramesThis Magwell is NOT Compatible with CL frames!!Works with Full Capacity and 10 rd Factory MagsPackage Includes:MagwellMounting ScrewHex Key -
Steel City Arsenal Slim Magwell Machined specifically to fitPolymer 80 PF940C Compact FramesThis Magwell is NOT Compatible with CL frames!!Works with Full Capacity and 10 rd Factory MagsPackage Includes:MagwellMounting ScrewHex Key -
Loads Pistol Magazines Fast, Protects Fingers & Thumbs
Hand-held loader fills pistol magazines quickly and easily, so you spend less range time loading mags and more of it shooting. Smooth, positive operation protects fingers and thumbs while you load hundreds of rounds painlessly—as fast as one round per second. Also lengthens magazine life by reducing wear and tear on feed lips.
UpLula fits single- and double-stack 9mm, .357 SIG, .40 S&W, 10mm, and .45 ACP magazines, plus some .380 mags. Will not load Glock 6-round single-stack .45 caliber, Smith & Wesson 7-round single-stack 9mm, or magazines with less than 8mm between feed lips.
-
This holster, features the Self Locking System (SLS) rotating hood and the low-ride Universal Belt Loop (UBL) that mounts to a 2″ (50mm) or 2.25″ (58mm) duty belt. The SLS allows for a smoother single-motion draw and greater protection against attempted takeaways. An optional Sentry can be installed making it a Level III Retention™. Includes a molded sight track, suede lining. The SafariLaminate™ construction is durable and easy to clean.
-
This holster features the Self Locking System (SLS) rotating hood design and the 567BL belt loop to fit 1.5 in. (38 mm) to 1.75 in. (45 mm) belts. With no snap, the SLS allows for a smoother, single-motion draw and greater protection against attempted weapon takeaways. The hood can only be released by being simultaneously pushed down and rotated forward and actually becomes more secure when upward force is applied. Durable SafariLaminate™ construction.
-
The 5197 holster is a compact and lightweight concealment belt holster with trigger guard detent. IDPA approved. It features the 567BL, an injection molded belt loop that fits 1.5 in. (38 mm) to 1.75 in. (45 mm) belt widths. It is compact, lightweight and features low cut sides for ease of draw and added comfort. The SafariLaminate™ construction makes this holster tough and durable, and its suede lining helps protect the gun’s finish.
-
The Safariland® Model 5198 holster is lightweight, with low-cut sides allowing for an easy draw, and an open-top designed for defensive pistol competition. The holster is also well suited for concealed carry due to its compact size. A trigger guard detent and adjustable tension device secure the gun in the holster during rigorous activity for reliable carry retention. Durable thermoformed SafariLaminate™ construction makes this holster tough enough for constant wear, and the STX finish keeps it looking good through years of use. The 5198 comes with both injection-molded paddle and belt loop, so you can attach and adjust carry for comfort and to match your needs. The Model 5198 open-top concealment holster is IDPA and USPSA approved.
-
The 5199 is a compact and lightweight concealment belt holster with trigger guard detent. It features a sturdy belt clip for easy attachment and detachment from the belt. Features low cut sides for ease of draw and added comfort. IDPA approved. Fits belt widths from 1.5 in. (38 mm) to 2.25 in. (58 mm).
-
This thumb snap holster for semiautomatics and small frame revolvers is a two-slot design and rides high on the hip and close to the body for excellent concealment. It features a fully molded holster front, giving a beautiful contoured appearance, in addition to being more comfortable to wear. The large rectangular thumb snap is a safety feature, helping to reduce the chance of the snap being caught in the trigger guard. Fits up to 1.5 in. (38 mm) belt width and is available in Plain Tan or Plain Black finish.
-
The 567 Custom Fit holster is one of the lightest, best fitting concealment holsters available. It adjusts to a wide variety of popular handguns, giving each a “custom fit”. In just six fits, it can accommodate over 180 handguns. This holster comes standard with the 567BL belt loop, fitting 1.5 in. (38 mm) to 1.75 in. (45 mm) belt widths. IDPA approved. SafariLaminate™ construction with combination plain and STX finish with suede lining to help protect the gun’s finish.
-
The 568 is one of the lightest, best fitting concealment holsters available. It adjusts to a variety of handguns, giving each a “custom fit”. In just six sizes, it fits over 180 handguns. It has a molded paddle design that is highly concealable and rides close to the body with a slightly forward cant. It also comes with the 567BL belt loop, fitting 1.5 in. (38 mm) to 1.75 in. (45 mm) belt widths. IDPA approved. It has a combination SafariLaminate™ and STX finish with suede lining.
-
The 569 Custom Fit holster is one of the lightest, best fitting concealment holsters available. It adjusts to a wide variety of popular handguns, giving each a “custom fit”. In just six fits, this design can accommodate over 180 handguns. This holster comes standard with the sturdy 745BL Belt Clip for easy on/off convenience. IDPA approved. It features a combination SafariLaminate™ and STX finish with suede lining to help protect the gun’s finish.
-
This open-top design for semiautomatics and small frame revolvers, fills a niche in the Bianchi line previously not offered. This model feature the fully molded holster front for improved comfort, and the open top design provides quick and convenient access. It’s designed for hip carry and features deep contour molding, making visible the distinct shape of the handgun it holds.
-
This tactical holster features the SLS (Self Locking System) rotating hood. With no snap, the SLS allows for a smoother single-motion draw and greater protection against attempted weapon takeaways. The hood can only be released by being simultaneously pushed down and rotated forward and actually becomes more secure when upward force is applied. It is also far less likely to release accidentally than conventional thumb break snaps. Molded sight track and soft SafariSuede™ protect the gun’s sights and finish. The Model 6004 features a single leg strap and leg shroud with mounting holes for optional accessories. The rugged STX finish protects the gun against scrapes, scratches and dents.
-
Safariland Model 6005 SLS Tactical Holster With Quick-Release Leg Strap for Glock OEM/SIG Sauer P320
This 6005 tactical holster features the Self Locking System (SLS) rotating hood. With no snap, the SLS allows for a smoother single-motion draw and greater protection against attempted weapon takeaways. The hood can only be released by being simultaneously pushed down and rotated forward and actually becomes more secure when upward force is applied. It is also far less likely to release accidentally than conventional thumb break snaps. The rugged STX Tactical® finish protects the gun against scrapes, scratches, and dents. The molded sight track and soft SafariSuede™ protect the gun’s sights and finish. It features a double strap leg shroud and vertical leg strap with quick-release detachable leg harness. The Hood Guard is included.
-
The Safariland® 6280 SLS Mid-ride model is a top draw, straight cant duty holster with the SLS (Self Locking System) rotating hood, which allows for a smoother single-motion draw and greater protection against attempted takeaways. The hood can only be released by being simultaneously pushed down and rotated forward. With Level II Retention™ capabilities, the 6280 can be adjusted to a Level III Retention™ with the addition of an optional Sentry device. Constructed of SafariLaminate™ the holster is durable, easy to clean. It features a tensioning device, suede lining and a molded sight track for protection of the firearm. The Universal Belt Loop (UBL) is offered in both a 2” (50mm) and 2.25” (58mm) width.
-
The Safariland® 6305 Tactical holster features the ALS® (Automatic Locking System) to lock the firearm in all directions upon holstering, while the rotating hood of the SLS (Self Locking System) clicks into place for additional security, and Level III Retention™. Both mechanisms release quickly to allow for a smooth, easy draw with no twisting required.
The 6305 features the quick-release double leg strap and leg shroud with detachable buckle for low-profile carry. The SafariSuede™ lining and molded sight track help protect the gun’s sights and finish. Constructed from thermoformed SafariLaminate™, the 6305 holster is extremely durable and rugged to protect the firearm from scuffs, scratches and dents.
-
This 6354 open top holster features the Automatic Locking System (ALS®), an internal locking device that retains the weapon in all directions with no snaps or straps to manipulate. Key to comfort and stability are the double leg strap and leg shroud. The leg harness is lightweight and simple to operate. Suede lining helps protect the gun’s sights and finish.
-
The Safariland® 6355 is a tactical drop-leg holster with a quick-release leg strap purpose-built for tactical situations. The intuitive ALS® (Automatic Locking System) offers excellent retention through an internal locking device that retains the weapon in all directions. The Hood Guard, an external shield, provides additional safety by protecting the release mechanism against takeaway attempts. Completely operable with the thumb, the holster is instinctive to use, and once the device is deactivated, a simple straight-up draw allows weapon retrieval.
Built for harsh environments, the 6355 ALS Tactical Holster is constructed of durable, thermoformed SafariLaminate™ and has a suede lining to help protect the weapon’s finish. The drop-leg design stays clear of a vest and pack, and silicone gripper strips keep the dual elastic leg straps in place. There are plenty of options to mount accessories on the holster’s shroud with optional ELS, QLS and MLS Quick Attachment Systems.
-
This holster with Automatic Locking System (ALS®) builds on the foundation of the Self Locking System (SLS). It locks the weapon in all directions upon holstering, it’s operable with the thumb, and the weapon can be drawn straight out of the holster with no twisting required. The mid-ride belt loop allows the holster to ride close to the body. The suede lining helps protect the gun’s sights and finish. Durable leather look SafariLaminate™ construction with leather look finish.
-
The 6362 ALS®/SLS Hi-ride duty holster is sturdy, lightweight, and provides an extra measure of security while on patrol. The ALS® (Automatic Locking System) builds on the foundation of the SLS (Self Locking System) to offer Level III Retention™. In addition to the SLS, Safariland’s patented ALS locks the firearm into place immediately upon holstering, while the rotating hood and tension device ensure added security. The 6362 holster can be easily upgraded to Level IV Retention® using the optional Sentry attachment. The 6362 is constructed of durable SafariLaminate™ and is lined with suede to protect the gun’s sights and finish.
-
This holster with Automatic Locking System (ALS®) builds on the foundation of the Self Locking System (SLS). It locks the weapon in all directions upon holstering, it’s operable with the thumb, and the weapon can be drawn straight out of the holster with no twisting required. The mid-ride belt loop allows the holster to ride close to the body. The suede lining helps protect the gun’s sights and finish. Durable leather look SafariLaminate™ construction with leather look finish.
-
This holster includes many of the features of the duty version with the Automatic Locking System (ALS®) and SLS rotating hood. Even with the SLS hood down, the ALS® system retains the weapon in all directions. Since there is no snap on the SLS hood, the SLS allows for a smooth single-motion draw. Features the 567BL belt loop that fits a 1.5 in. (38 mm) or 1.75 in. (45 mm) belt and includes a tensioning device. Molded sight track and suede lining.
-
The Safariland Model 637 is a great combination of superb retention and concealability. This belt slide holster features the ALS® locking retention system, which secures the firearm in place once holstered, allowing an instinctive, straight-up draw once the release is deactivated via the thumb. The 637 features a low-profile design with a soft, flexible body that allows the holster to mold around the wearer and sit higher and tighter on the hip. A tension adjustment provides a customized firearm fit to the user and is available in Plain Black finish.
-
The 6376 holster features the Automatic Locking System (ALS®). The ALS locks the firearm securely in place when holstered, but still allows a natural draw with a swipe of the thumb release as you establish your grip. SafariLaminate™ construction makes the holster strong on the outside, while SafariSuede™ on the inside protects your firearm’s front sight and finish. This holster includes a hi-ride injection-molded belt loop that fits 1.5″ (45mm) belt widths.
-
This holster is a concealment version of the Automatic Locking System (ALS®) series holsters. Once the weapon is holstered, it “locks” into place, providing an extra measure of security from open top holsters. A straight up draw is used once the ALS is de-activated. It comes standard with the 567BL belt loop, for 1.5 in. (38 mm) to 1.75 in. (45 mm) belt widths. Suede lining helps protect the gun’s sights and finish, SafariLaminate™ wraparound design with a tough STX finish.
-
Open-Top Paddle Holster with ALS® Combining the concealable, accessible design of an open-top paddle holster with the security of ALS®, the Safariland® Model 6378 Holster is made for the rigors of daily use by plain-clothed officers and sidearm carriers. ALS® locks the firearm securely in place when holstered, but still allows a natural draw with a swipe of the thumb release as you establish your grip. SafariLaminate™ construction makes the holster strong on the outside, while SafariSuede™ on the inside protects your firearm’s front sight and finish. The Model 6378 comes with both the paddle attachment and a standard belt loop, making this holster as versatile as it is functional.
-
This holster is a concealment version of the Automatic Locking System (ALS®) series holsters. Once the weapon is holstered, it locks into place, providing an extra measure of security from standard open top holsters. A straight up draw is possible once the ALS is de-activated. It comes standard with the 745BL belt clip for 1.5 in. (38 mm) to 2.25 in. (58 mm) belt widths. Suede lining helps protect the gun’s sights and finish; SafariLaminate™ construction with a tough STX finish.
-
This 6384 open top holster features the Automatic Locking System (ALS®), an internal locking device that retains the weapon in all directions with no snaps or straps to manipulate. This holster is optimized for use with a MOLLE vest. Key to comfort and stability are the double leg strap and leg shroud. The leg harness is lightweight and simple to operate. Suede lining helps protect the gun’s sights and finish.
-
This 6385 OMV open top holster features the Automatic Locking System (ALS®), an internal locking device that retains the weapon in all directions with no snaps or straps to manipulate. This model is optimized for use with the MOLLE vest because the placement of the 3-hole pattern. Suede lining helps protect the gun’s sights and finish.
-
This open top holster features the Automatic Locking System (ALS®), an internal locking device that retains the weapon in all directions with no straps or snaps to manipulate. Once the weapon is holstered, it locks into place. The holster is completely operable with the thumb and once the ALS is de-activated a simple straight up draw is used. Features a mid-ride belt loop that rides close to the body, and a suede lining to protect the gun’s sights and finish.
-
The Safariland® 6392 holster is a hi-ride duty holster with the added security of ALS® (Automatic Locking System), which provides Level I Retention™ without inhibiting the draw stroke. The ALS engages immediately upon holstering, but releases quickly and easily with a swipe of the thumb during the draw. Constructed from durable SafariLaminate™, the Model 6392 holster has a suede lining to protect your firearm’s finish. The hi-ride design carries comfortably and includes a removable Hood Guard to protect the thumb release. A variety of textures and finishes make it easy to match the 6392 holster to your duty belt, and adding the optional ALS Guard allows the user to upgrade the holster to Level II Retention™.
-
Purpose-built for the security of duty officers, the Safariland® 6395 ALS® open-top holster features the ALS (Automatic Locking System), an internal locking device that retains the weapon in all directions immediately upon holstering, with no straps or snaps to manipulate. The holster is completely operable with the thumb and once the ALS is deactivated a simple straight-up draw is used. Constructed from durable SafariLaminate™, the Model 6395 ALS holster has a suede lining to protect your firearm’s sights and finish. This holster features a low-ride belt loop that is 1.5″ lower than standard, to allow your firearm to ride close to the body.
