Menu Close
  • MDX Polymer 80 PF940V2 80% Full Size Frame Kit Glock 17/22/24/31/34/35 Gen 3 Black
    • The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
    • Next Generation Ergonomics and Features
    • High-Strength Reinforced Polymer Construction
    • The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
    • Picatinny/STANAG Compliant Accessory Rail
    • Blank Serialization Plate
    • Stainless Steel Locking Block Rail System (LBRS™)
    • Stainless Steel Drop-In Rear Rail Module (RRM™)
    • Hardened Pins for LBRS™ and RRM™
    • Complete Finishing Jig, Drill bits
    • Patent Pending
  • MDX Polymer 80 PF940V2 80% Full Size Frame Kit Glock 17/22/24/31/34/35 Gen 3 OD Green
    • The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
    • Next Generation Ergonomics and Features
    • High-Strength Reinforced Polymer Construction
    • The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
    • Picatinny/STANAG Compliant Accessory Rail
    • Blank Serialization Plate
    • Stainless Steel Locking Block Rail System (LBRS™)
    • Stainless Steel Drop-In Rear Rail Module (RRM™)
    • Hardened Pins for LBRS™ and RRM™
    • Complete Finishing Jig, Drill bits
    • Patent Pending
  • MDX Polymer 80 PF940V2 80% Full Size Frame Kit Glock 17/22/24/31/34/35 Gen 3 Blue Titanium
    • The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
    • Next Generation Ergonomics and Features
    • High-Strength Reinforced Polymer Construction
    • The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
    • Picatinny/STANAG Compliant Accessory Rail
    • Blank Serialization Plate
    • Stainless Steel Locking Block Rail System (LBRS™)
    • Stainless Steel Drop-In Rear Rail Module (RRM™)
    • Hardened Pins for LBRS™ and RRM™
    • Complete Finishing Jig, Drill bits
    • Patent Pending
  • MDX Polymer 80 PF940V2 80% Full Size Frame Kit Glock 17/22/24/31/34/35 Gen 3 Cobalt
    • The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
    • Next Generation Ergonomics and Features
    • High-Strength Reinforced Polymer Construction
    • The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
    • Picatinny/STANAG Compliant Accessory Rail
    • Blank Serialization Plate
    • Stainless Steel Locking Block Rail System (LBRS™)
    • Stainless Steel Drop-In Rear Rail Module (RRM™)
    • Hardened Pins for LBRS™ and RRM™
    • Complete Finishing Jig, Drill bits
    • Patent Pending
  • MDX Polymer 80 PF940V2 80% Full Size Frame Kit Glock 17/22/24/31/34/35 Gen 3 FDE
    • The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
    • Next Generation Ergonomics and Features
    • High-Strength Reinforced Polymer Construction
    • The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
    • Picatinny/STANAG Compliant Accessory Rail
    • Blank Serialization Plate
    • Stainless Steel Locking Block Rail System (LBRS™)
    • Stainless Steel Drop-In Rear Rail Module (RRM™)
    • Hardened Pins for LBRS™ and RRM™
    • Complete Finishing Jig, Drill bits
    • Patent Pending
  • MDX Polymer 80 PF940V2 80% Full Size Frame Kit Glock 17/22/24/31/34/35 Gen 3 Gray
    • The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
    • Next Generation Ergonomics and Features
    • High-Strength Reinforced Polymer Construction
    • The ReadyMod® frame features a blank grip design that is ready for stippling and other grip customization.
    • Picatinny/STANAG Compliant Accessory Rail
    • Blank Serialization Plate
    • Stainless Steel Locking Block Rail System (LBRS™)
    • Stainless Steel Drop-In Rear Rail Module (RRM™)
    • Hardened Pins for LBRS™ and RRM™
    • Complete Finishing Jig, Drill bits
    • Patent Pending
  • Polymer 80 PF940 V2 80% Full Size Frame Kit Glock 17/22/24/34/35 Black

    The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.

  • Polymer 80 PF940 V2 80% Full Size Frame Kit Glock 17/22/24/34/35 Gray

    The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.

  • Polymer 80 PF940 V2 80% Full Size Frame Kit Glock 17/22/24/34/35 Blue Titanium

    The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.

  • Polymer 80 PF940 V2 80% Full Size Frame Kit Glock 17/22/24/34/35 Cobalt

    The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.

  • Polymer 80 PF940 V2 80% Full Size Frame Kit Glock 17/22/24/34/35 FDE

    The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.

  • Polymer 80 PF940 V2 80% Full Size Frame Kit Glock 17/22/24/34/35 OD Green

    The Polymer80 PF940 V2 80% Full Frame Kit has all you need to start a pistol build. The Polymer80 PF940 frame kit includes the 80% compact pistol frame, jig, and all tooling required to finish the frame using a drill press and XY cross-vise. Features like the extended beaver tail, double undercut trigger guard, and thumb ledge considerably enhance the ergonomics. Allowing for a very effective grip and improved recoil control. Built with high-strength reinforced polymer construction. It comes equipped with the aggressive standard grip texture which also allows custom stippling and modification.

  • Polymer 80 PFS9 Serialized Frame for Glock 17/22

    Polymer 80 has released their new Serialized Stripped PFS9™ Standard Frame for Glock® 17/22 models. The PFS9™ Standard Frame comes equipped with 17-round capacity, as well as advanced features and ergonomics traditionally reserved for aftermarket modifications. It’s a perfect option for your next competition or duty setup. The PFS9™ comes stripped and ready for assembly and customization with parts of the builder’s choice! The frame is made with high-strength reinforced polymer, providing a sturdy frame for multiple applications.

  • Glock Gen3 OEM Frames (Stripped & Complete) Glock 17, 19, 26 & 34

    Stripped frames are stripped of all parts and only include the frame itself. No parts will be included with stripped frames.

    Complete frames include all factory parts but do not include any magazines, case or other items.

    Glock 17 & Glock 34 frames are identical in every way and can be used interchangeably. The complete Glock 34 frames will differ from the Glock 17 frames only in that the Glock 34 frame includes an extended magazine and slide release.

  • LoneWolf Glock 17 / Glock 19 Compact Timberwolf 80% Frame

    The TWC-C and TWC-F accept Gen3 and Gen4 G19, 23, 32, and 38 slides.

    When using a Gen4 slide you simply remove the installed adapter in the dust cover area of the frame. Using Gen3 slides you leave the adapter in place to fill the gap between the slide and dust cover.

    The TWC includes the dust cover adapter, removable magazine well, and interchangeable backstraps.

    No matter what your shooting goal is, the TWC will fit your needs. Whether you want a gun for backwoods carry, a longslide for competition, a slim and easy to carry 9mm for personal protection, or just want to build the coolest gun at the range, the Timberwolf Compact can make your dreams come true.

  • LoneWolf Glock 17 / Glock 19 Full Size Timberwolf 80% Frame

    When we first launched the original Timberwolf frame, one of the first questions was “when will it be available in 9mm, .40 S&W, and .357SIG?” That time is now, because we’ve revamped and upgraded the design to bring you the Timberwolf Full Size. The first thing you’ll notice is that the TWF fits in your hand like a much smaller pistol.

    The TWF-C and TWF-F accept Gen3 and Gen4 G17, 22, 31, and 37 slides.

    When using a Gen4 slide you simply remove the installed adapter in the dust cover area of the frame. Using Gen3 slides you leave the adapter in place to fill the gap between the slide and dust cover.

    The TWF includes the dust cover adapter, removable magazine well, and interchangeable backstraps.

     

  • LoneWolf Glock 17 / Glock 19 Large Timberwolf 80% Frame

    The TWL is available in two grip lengths: full and short. Both grip lengths accept G20/G21 Gen3 and Gen4 slides, as well as G40/G41 slides. The TWL-Full uses G20/G21 magazines, and the TWL-Subcompact uses G29/G30 magazines while still using a G20/21 slide. Both grips are available with our grip texture, or smooth so you can add your own stippling! When using a Gen4 slide you simply remove the installed adapter in the dust cover area of the frame. Using Gen3 slides you leave the adapter in place to fill the gap between the slide and dust cover.

    The Timberwolf Large is available in multiple configurations, all of which include the dust cover adapter, removable magazine well, and interchangeable backstraps. Short grip frames do not have magwells included.

  • GLOCK OEM Glock 17 Gen3 Extended Upper & Lower Parts Fits 9 millimeter

    The Lower Part Kit includes- For G17 and Polymer 80 – The kits do not include a locking block.

    357 – Glock OEM Trigger with Trigger Bar
    322 – Glock OEM Trigger Mechanism Housing with Ejector
    343 – Glock OEM 5LB. Trigger Connector
    350 – Glock OEM Trigger Spring
    7496 – Glock OEM Extended Slide Release Lever
    1981 – Glock OEM Extended Magazine Release
    280 – Glock OEM Magazine Release Spring
    301 – Glock OEM Slide Lock
    420 – Glock OEM Trigger Pin
    4368 – Glock OEM Locking Block Pin
    5446 – Glock OEM Slide Lock Spring
    427 – Glock OEM Trigger Housing Pin

    The Upper Parts Kit Includes- all parts are Glock OEM.
    Recoil Spring (01533)
    Channel Liner (01148)
    Extractor (01895)
    Firing Pin Safety & Spring (00077)
    Slide Cover Plate (00133)
    Extractor Depressor Plunger (00112)
    Extractor Depressor Plunger Spring (33522)
    Spring Loaded Bearing (02714)
    Firing Pin (00049)
    Firing Pin Spring (00063)
    Spacer Sleeve (00056)
    Firing Pin Spring Cups (00070)

  • Glock OEM 17 Gen3 Lower Parts Kit 9mm Polymer-80 Spectre PF940-v2 LPK

    Factory OEM Glock parts included in this kit:

    SP00357 – Glock OEM Trigger with Trigger Bar
    SP00322 – Glock OEM Trigger Mechanism Housing with Ejector
    SP00343 – Glock OEM 5LB. Trigger Connector
    SP00350 – Glock OEM Trigger Spring
    SP02919 – Glock OEM Standard Slide Release Lever
    SP00287 – Glock OEM Magazine Release
    SP00280 – Glock OEM Magazine Release Spring
    SP00301 – Glock OEM Slide Lock
    SP00420 – Glock OEM Trigger Pin
    SP04368 – Locking Block Pin
    SP05446 – Slide Lock Spring

  • Polymer80 Frame Parts Kit for Glock 19 / Glock 17 Gen3 9mm

    A Complete Parts Kit Perfect for Your Pistol Build

    Polymer80 made a name for itself with the company’s line of partially finished, unserialized, Glock style pistol frames, giving consumers an opportunity to test their building skills by creating a usable pistol frame. Now, the company is expanding its offerings to include all of the necessary elements needed to finish a Glock-style handgun frame build in the form of the company’s Glock Gen 3 Frame Parts Kit.

    Designed for use with all of the company’s 9mm pistol frames, including the PF940c, PF940v2, PF940CL, PF904SC, the Polymer80 Glock Frame Parts Kit is also compatible with Glock’s OEM 9mm pistol frames, giving consumers the parts they need to finish a G17, G19, G26 or even a G34. Every kit will include two trigger shoes, either a curved or a flat option, with the flat-faced trigger coming pre-installed onto the trigger bar. The kit also includes slide-lock springs for full-size, compact and subcompact pistols.

  • Magazine Catch Spring for Glock. Fits All Models. Two (2) Pieces

    Magazine Catch Spring for Glock. Fits All Models. 2 Springs.

  • Polymer 80 PF-Series Slide Parts Kit - Black/Red

    The Polymer 80 Slide Parts Kit designed for the PF-Series of Glock style pistols comes with all the components you need to complete your slide. It comes with upgraded parts like the striker, extractor, depressor, and safety plunger which are machined from 17-4 PH stainless steel for long term durability and reliability. The cover plate is machined from 6061-T6 aluminum and the springs are made from heat treated stainless steel. All the polymer components come in red. Complete your build today with the Polymer 80 Slide Completion Parts Kit.

    Fits:

    • PF-Series
    • Gen 1-4 Glock slides

    Kit Includes:

      • 17-4 PH Stainless Steel Striker and Striker Safety
      • 17-4 PH Extractor and Extractor Plunger
      • 6061-T6 Aluminum Cover Plate
      • 5.5lb Striker Spring, Extractor Plunger Spring, Striker Safety Spring
      • Channel Liner
      • Striker Spacer Sleeve
      • Spring Cups

    Extractor Plunger Bearing

  • NineX19 Steel City Arsenal Gen1-4 Glock Upper Parts Kit 9mm
  • Polymer80 PF-Series/Glock Slide Parts Kit Color: Black, Red

    Kit Includes:

    PF-Series 17-4 PH Stainless Steel Striker, 9mm Extractor (Available in Black or Bronze), Extractor Depressor, and Striker Safety
    PF-Series 6061-T6 Aluminum Cover Plate
    PF-Series Stainless Steel 5.5lb Striker Spring, Extractor Depressor Plunger Spring, and Striker Safety Spring
    PF-Series Striker Channel Liner, Striker Spacer Sleeve, Striker Spring Cups (2), and Extractor Depressor Plunger Bearing (Available in Red or Gray)

  • EV Technologies Upper Parts Kit for 9mm Gen3-4 Glock 17 19 26 34

    The Zev Technologies Upper Parts Kit for 9mm Gen ¾ Glock is a practical product for a weapon owner. All of the mechanisms that are needed to build an upper assembly are included with this bundle. The process of using this product is easy because all of the components are specifically designed for a traditional Glock gun. Constructed of a highly durable material, there is no danger of rust when used in a wilderness situation.

  • Firing Pin Assembly for Glock 17/19/26 9mm Gen1–4 Upper Part

    Firing Pin Assembly for all Glock 9mm and .380 pistols Gen1–4 excluding G43 & G42. New unbranded upper part.

  • Glock OEM Glock 17 Gen1–3 Upper Slide Parts Kit 9mm

    For Glock Gen 1- 3 G17 Upper Slide Parts Kit 9 milimeter Genuine Glock OEM Parts

  • Nomad Defense Guide Rod for Glock 17 Gen 4/5 - ISMI 15# Spring

    Nomad Defense Stainless Steel Guide Rod for full-size Glock 17 and Glock 34 Gen 4/5 with ISMI 15# Recoil Spring

    INCLUDES:
    QPQ Nitride Coated Stainless Steel Guide Rod
    Gen 4 Captured Rod Adapters
    15lb ISMI Recoil Spring
    – – – – –
    Made in the USA

  • Upper Slide Parts Kit for Glock 17 Pistols Gen1–3 with Stainless Recoil Spring

    Upper Slide Parts Kit for Glock 17 Pistols Gen1–3 with Stainless Recoil Spring.

  • L2D Combat Ultimate Upper Parts Kit, Glock 9mm Glock 17

    2D Combat upper parts kits are a drop in solution to upgrade or complete your Glock pistol build. Each kit is comprised of high quality 17-4 stainless steel highly polished components, premium grade ISMI performance springs and essential OEM Glock polymer parts.

  • Rock Slide USA Stainless Steel Recoil Guide Rod & Spring for Glock 17 & 22 Gen3

    Rock Slide USA Stainless Steel Recoil Guide Rod & Spring for Glock 17, 22 and 31 Gen1–3.

  • Guide Rod Recoil Spring for Glock Models 17 or 22 Gen1–3 Factory Weight 17lb

    Guide Rod Recoil Spring for Glock Models 17, 22, and 31. Gen1–3 Factory Weight 17lb.

  • Glock OEM Gen3 Factory Guide Rod Recoil Spring Assembly Glock 17 22 24 31 34 SP01533

    Glock OEM Gen3 Factory Guide Rod Recoil Spring Assembly Glock 17 22 24 31 34 SP01533.

  • JSD Supply 80% Glock Compatible Lower Parts Kit - LPK

    Complete Kits for a Complete Build
    A JSD Glock 80% lower parts kit that fits Glock firearms is part of the ultimate DIY handgun solution. We have the parts you need to build a firearm with a few simple tools and straightforward instructions.

    Included in this kit:

    Trigger
    Trigger Spring
    Trigger Housing
    Trigger Pin
    Trigger Bar
    Slide Lock
    Slide Lock Spring (PF940v2, PF940C)
    Locking Block Pin
    Slide Stop
    Magazine Catch Spring
    Magazine Catch
    By assembling these components from our Glock parts kits as part of your frame, you’ll have a fully functional firearm without the hurdles of a background check or government fees. Your personally built weapon also won’t require a serial number, making it the perfect solution when privacy is a priority.

  • JSD Supply Glock Slide Completion Kit

    Glock Compatible Slide Completion Kit
    Complete and upgrade your slide components with this high-quality Glock compatible slide completion kit. They’re perfect for an upgrade or for completing your Polymer80 build. Gun engineering doesn’t get much better than this semi-automatic pistol. And you have full control over the engineering process when you build your own gun!

    Nothing Beats a Great Design
    The Glock design is manufactured with only 34 component parts. As one of the four primary parts on a semi-automatic pistol, the slide is interchangeable between different Glock compatible models. This is a major convenience when customizing your firearm. Thanks to tighter legislation and increasing issues of buying a gun the traditional way, more gun owners than ever are taking a DIY approach to owning a firearm and completing their slide assembly with our Glock slide completion kits. It is a testament to the simplicity of this pistol design and allows for greater quality control since you, as the gun owner, are putting your own effort into creating it yourself!

    What’s Included
    The slide is the upper portion of a semi-automatic pistol that chambers ammunition into the barrel and extracts the spent casing after the round is fired. These parts will finish out your stripped Glock G26, G19, or G17 compatible slide. Our slide completion kit includes all of the small internal parts needed to complete your slide assembly. This Glock slide parts kit includes:

    Striker
    Cover Plate
    Extractor
    Channel Liner
    Striker Spacer Sleeve
    Spring Cups
    Striker Spring
    Plunger
    Plunger Spring
    Bearing

  • JSD Supply Patmos Arms Judah Glock 17 PF940v2 Kit Full Build Minus Frame

    This complete PF940v2 kit has everything you need to build your own 80% PF940v2 full-size pistol, including Patmos Arms slide and internals, minus the frame. The PF940v2 is the industry’s first 80% pistol frame that offers compatibility with 9mm G17 components. This full build kit is suited for completion of an 80% Glock 17 compatible pistol that will feel and function like you bought it from a supplier.

  • NineX19 Glock 17 Gen3 X1 Slide RMR Cut Black Nitride - Use Code MGB for 10% Discount

    The NineX19 X1 Slide strikes a perfect balance between form and function. The precision machined windows give the X1 its “Gucci” aesthetic while the aggressive rear serrations and RMR-pattern optics cut provide functional performance and capability. Machined from 17-4 stainless steel billet and coated with either black nitride or FDE Cerakote, the X1 slide will stand up to whatever abuse you can dish out, be it long days in a holster or rigorous use at the range.

    FEATURES
    • Compatible with Gen 3 Glock 17 models and most G17-pattern builder platforms (eg: Nomad Defense, Polymer 80, Lone Wolf, etc) (NOTE: May also fit Gen 4 & 5 frames with minor modifications.)
    • RMR-pattern optic mounting cut (includes matching cover plate)’
    • Available in Black Nitride or FDE Cerakote finishes
    • Reduced reciprocating weight (vs OEM slide) lowers felt recoil and improves accuracy on follow-up shots
    • Generous windows dissipate barrel heat for prolonged service life and enhanced performance
  • NineX19 Glock 17 Gen3 X1 Slide RMR Cut FDE Cerakote - Use Code MGB for 10% Discount

    The NineX19 X1 Slide strikes a perfect balance between form and function. The precision machined windows give the X1 its “Gucci” aesthetic while the aggressive rear serrations and RMR-pattern optics cut provide functional performance and capability. Machined from 17-4 stainless steel billet and coated with either black nitride or FDE Cerakote, the X1 slide will stand up to whatever abuse you can dish out, be it long days in a holster or rigorous use at the range.

    FEATURES
    • Compatible with Gen 3 Glock 17 models and most G17-pattern builder platforms (eg: Nomad Defense, Polymer 80, Lone Wolf, etc) (NOTE: May also fit Gen 4 & 5 frames with minor modifications.)
    • RMR-pattern optic mounting cut (includes matching cover plate)’
    • Available in Black Nitride or FDE Cerakote finishes
    • Reduced reciprocating weight (vs OEM slide) lowers felt recoil and improves accuracy on follow-up shots
    • Generous windows dissipate barrel heat for prolonged service life and enhanced performance
  • Swampfox Wolverine Slide Glock 17, 19 - Use Code MGB for 20% Discount
  • JSD Supply Patmos Arms Judah Glock 17 Slide

    Patmos Arms Judah 17 G17 Compatible Slide
    This G17 slide is Glock compatible and precision machined from 4140 heat-treated steel for a drop-in fit. Slides are shipped with no internal components and ready for standard factory replacement parts or a variety of aftermarket performance parts (including sights).

    Well Known In The Industry
    Our Patmos Arms Judah series of slides are made with exact tolerances and dimensions. They’re manufactured and machined by pre-programmed computer software with precision in mind. They are skillfully designed for both form and function with everyday gun carrying in mind.

    About The Slide
    Your new G17 compatible slide can give your shooting confidence the boost it needs. If you’ve been looking for the perfect option to add on to your gun or you want to enhance the experience, this is the slide for you. Our G17 custom slide will help make you and your new trusty sidekick more accurate than ever. We know that every great homemade gun starts with a reliable 80% lower receiver. This is the perfect upper half to complement your Polymer80 PF940 or PF940v2 frame.

    Choose from several options to customize your internals, sight cut, and barrel while creating a completely personalized slide. This Patmos Arms Glock compatible slide features the following:

    100% CNC Machined from Bar Stock
    416 Stainless Steel Heat Treated
    Nitride Coated
    Front and Rear Serrations

  • JSD Supply PF940v2 Glock 17 Full Build Kit - Minus Frame

    This complete PF940v2 kit has everything you need to build your own 80% PF940v2 full-size pistol, including Patmos Arms slide and internals, minus the frame. The PF940v2 is the industry’s first 80% pistol frame that offers compatibility with 9mm G17 components. This full build kit is suited for completion of an 80% Glock 17 compatible pistol that will feel and function like you bought it from a supplier.

    Included With This Full Build Kit
    This is a complete build kit that includes the following:

    Patmos Arms Judah 17 Complete Slide – Made in the USA
    Patmos Arms G17 Barrel – Made in the USA
    Black Nitride
    Complete Lower Parts Kit
    This kit does not include Polymer 80 PF940v2 frame and jig

  • MDX Arms Advantage Arms .22LR Complete Slide Compact Glock 17/22 Conversion Kit

    ADJUSTABLE SIGHTS
    The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation

    LAST ROUND LOCK OPEN
    The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol.

    INTERNAL FIRING PIN SAFETY
    Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm.

    FINISH
    All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel.

    THE 10 SECOND INSTALLATION
    Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice.

  • MDX Arms CAA MCK Micro Conversion Kit with Gen. 2 Stabilizer for Polymer80 Glock 17/19/22/23/31
    • Fits Polymer 80 models V1/V2 for comparable Glock models 17/19/22/23/31
    • Comes with 2 Charging Handles (One for Glock slides and One for P80 slides)
    • Equipped with the MCKGEN2 Stabilizer which shoots folded and locked
    • Rear door extends an additional 15 degrees making it easier to insert and extract the handgun
    • Accommodates suppressor height sights
    • Suppressor friendly accommodating a suppressor up to 1.38” diameter
    • Features an improved spare magazine holder that operates with a mag catch and magazine release button
    • Compatible with the MCKGEN2 Brass Catcher
    • Comes standard with polymer top Picatinny rail
  • MDX Arms CAA Standard Micro MCK Stabilizer Conversion Kit for Glock 17,19,19X,22,23,31,32,G45
    • The next generation of Micro Roni is here! We improved our past generation models into the ultimate conversion kit. It’s Micro Roni Generation 4, and we call it Micro Conversion Kit, or simply MCK.
      This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body.
      It is greatly improved from previous generations of the Micro Roni Stabilizer. Available for select Gen 3, 4, and 5 Glock models.
      The extended stabilizer, which now comes standard, enables one-handed firing for better shooting performance. It also comes with a Velcro® strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards. MCK comes in two versions, one is a NON-NFA product (with standard long stabilizer brace), and the other is a NFA product (with stock).
  • MDX Arms G17 STRIKE LITESLIDE Build Kit - No Frame

    Build Your Own Kit Includes: 

    • Strike Industries LITESLIDE for G17 Gen3
    • Polymer Front and Rear Sights
    • Complete Slide Parts Kit with Guide Rod (Channel Liner Installed)
    • G17 Non Threaded Barrel in Stainless Steel or Black Nitride
    • RMR Plate Not Included
    • Compatible with Glock G17/Polymer80 PF940v2 Frame

    Optional:

    • Threaded Barrel in Stainless Steel, Black Nitride, TiN
    • Lower Parts Kit (LPK)

    *Non Selectable items (in gray) means item is out of stock

    FRAMES NOT INCLUDED. SOLD SEPARATELY CLICK HERE

  • MDX Arms SI G17 Full Size 9mm Complete Slide Glock 17

    Complete Slide Includes:

    • S1 Custom 17-4PH SS CNC Slide
    • Complete Slide Parts Kit (Not Installed)
    • Match Barrel
    • Front and Rear Sights
    • Channel Liner Installed
    • RMR Plate Covers Are Optional
  • MDX Arms SI G17 Full Size 9mm Stripped Slide Glock 17
    • Machined from AZT 17-4PH Billet Stainless Steel Blanks
    • Black Oxide finished for increased wear and corrosion resistance.
    • Heat Treated to 36-40 on the Rockwell C Scale
    • Deep Scallop Front and Rear Serration have been machined to enhance grip as well as aesthetics.
    • Outlined Top and Side Ports offers weight reduction
    • Center Outlined Pockets offers that unqiue look
    • 45 Degree chamfered top edges to reduce weight and increase responsiveness.
    • RMR Cut to a depth of .125″.
    • Uses 6-32 Thread for RMR Screws – Not Included
    • 2 front alignment posts incorporated into the RMR cut.
    • Compatible with Gen3 G17 frames, Polymer80 Pf940V2 G17
    • Channel Liners Installed
    • Sights and RMR Plate Cover available at an additional cost.
    • Professional gunsmith assembly recommended.
  • MDX Arms Strike Industries ARK G17 Barrel for Glock 17 Black Nitride 9mm
    • Strike Industries’ ARK G17 Barrel for GLOCK™ is a spiral fluted barrel that provides a union between match grade performance with unsurpassed reliability, reduction in weight without sacrificing any accuracy or durability. From the pre-hardened 416 premium grade stainless steel to the extreme tolerances of exact details and contours, the barrel is corrosion resistant with high tensile strength, The ARK G17 Barrel for GLOCK is not only a premium upgrade to your G17, it is the ultimate performance enhancer and the highlight of any G17 builds.The ARK G17 Barrel for GLOCK is a prime example of aesthetics, performance, and function, all qualities we strive for here at Strike Industries.

      Chambering: 9mm
      Material: pre-Hardened 416R Stainless Steel
      Finishing: Black Nitride
      Rifilng: 1:10 6-Groove rifling with precision crown

      Featuring a polished feed ramp for reliable loading and ejecting

  • MDX Arms ZEV Technologies Barrel Replacement Glock 17, Dimpled Burnt Bronze

    Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.

    ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

    The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.

  • MDX Arms ZEV Technologies Barrel Replacement Glock 17, Dimpled Stainless Steel

    Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.

    ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

    The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.

  • MDX Arms ZEV Technologies Barrel Replacement Glock 17, Dimpled, Supp. Threaded (1/2x28) Black DLC

    Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.

    ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

    The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.

  • MDX Arms ZEV Technologies Barrel Replacement Glock 17, Dimpled, Supp. Threaded (1/2x28) Burnt Bronze

    Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.

    ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

    The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.

  • MDX Arms ZEV Technologies Barrel Replacement Glock 17, Dimpled, Supp. Threaded (1/2x28) Gold

    Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.

    ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

    The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.

  • MDX Arms ZEV Technologies Barrel Replacement Glock 17, Dimpled, Supp. Threaded (1/2x28) Stainless Steel

    Zev Technologies» Match Grade drop-in Glock¬ replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.

    ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

    The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.

  • 80P Builder Elite 2.0 Glock 17 Slide Custom

    With our new 80P Builder ELITE 2.0 slide
    17-4 Stainless Steel slide with Front and Rear serrations
    Match grade Barrel for Compatible with Glock® 17
    Upper Parts Kit installed
    Lower Parts Kit
    OEM Guide Rod/Recoil Spring assembly
    OEM Sights installed
    Slide is fully assembled

  • 80P Builder Elite Glock 17 Complete Slide Custom

    With our new 80P Builder GOON slide
    17-4 Stainless Steel slide with Front and Rear serrations
    Match grade Barrel for Compatible with Glock® 17
    Upper Parts Kit installed
    Lower Parts Kit
    OEM Guide Rod/Recoil Spring assembly
    OEM Sights installed
    Slide is fully assembled

  • 80P Builder Elite 2.0 Glock 17 Long Slide Custom

    With our new 80P Builder ELITE 2.0 slide
    17-4 Stainless Steel slide with Front and Rear serrations
    Match grade Barrel for Compatible with Glock® 17 Long
    Upper Parts Kit installed
    Lower Parts Kit
    OEM Guide Rod/Recoil Spring assembly
    OEM Sights installed
    Slide is fully assembled

  • Adams Arms Glock 17 & Glock 19 VS17 Slide - Stripped

    The new VS G17 and G19 Glock 9mm Slide Assembly is designed as an improved drop-in fit for the Glock. The VS Slide is profiled and lightened with a large port to reduce reciprocal mass and decrease felt recoil. Our VS Slides are cut from stainless steel with enhanced front and rear cocking serrations for improved manipulation and slide geometry. The VS includes a cover plate with a cut out for our proprietary optic plates. Plates sold separately to fit Trijicon RMR, Leupold Deltapoint Pro, Burris Fastfire 3, Vortex Venom, Razor, and Viper, C-More STS, and Shield RMS.

  • Agency Arms Field Battle Stripped Precut Glock 17 Pistol Slide

    Agency Arms precut slides are machined from 17-4 Stainless Steel and coated in Diamond Like Carbon. These pre-cut slides will come with a Gen 3 ISMI Recoil Spring Assembly (RSA) and a channel liner installed (Gen 4 compatible models will come with an adapter for the RSA). The Field Battle model is our utilitarian design featuring enhanced rear serrations, aggressive front serrations and precut with our Agency Optic System (AOS).

  • Agency Arms Gavel Stripped Precut Glock 17 Gen 3 Pistol Slide

    Agency Arms precut slides are machined from 17-4 Stainless Steel and coated in Diamond Like Carbon. These pre-cut slides will come with a Gen 3 ISMI Recoil Spring Assembly (RSA) and a channel liner installed (Gen 4 compatible models will come with an adapter for the RSA). The Gavel model is another utilitarian design featuring enhanced rear serrations, aggressive front serrations, top serrations and precut with our Agency Optic System (AOS).

  • Agency Arms Peacekeeper Stripped Precut Glock 17 Pistol Slide Gen3-4 Black

    Agency Arms precut slides are machined from 17-4 Stainless Steel and coated in Diamond Like Carbon. These pre-cut slides will come with a Gen 3 ISMI Recoil Spring Assembly (RSA) and a channel liner installed (Gen 4 compatible models will come with an adapter for the RSA). The Peacekeeper model introduces slide lightening windows and is optimized to have great balance when running a RDS. The design features a tri-top cut, enhanced rear serrations, aggressive front serrations, side windows (L + R), extended chamfer serrations and precut with our Agency Optic System (AOS).

  • Agency Arms Syndicate S1 Stripped Glock 17 Pistol Slide Gen 3-4 Black

    The Syndicate S1 slide is the newest addition to the Syndicate by Agency Arms product lineup. Syndicate by Agency provides the same level of quality you expect from Agency Arms at a more economical price point. It features angled serrations in the front and rear, these serrations increase surface area over OEM style serrations, they also provide a positive grip regardless of grip location. These slides are machined from billet 17-4 stainless steel and coated in Diamond Like Carbon (DLC). They come equipped with the Agency Optic System (AOS), which is the most modular optic system in today’s market. These slides are stripped slides and only include a channel liner.

  • Alpha Shooting Sports Alpha EDC V3 Glock 17 Gen3 Pistol Slide Silver or Black

    Skeletonized pocket patterns have been machined into this version to enhance aesthetics as well as reduce weight and increase responsiveness. RMR Cap included. Top press check/cocking serrations. RMR Cut to a depth of .125″. Rear Sight dove tail cut set up to co witness in front of the RMR optic. Matching 60 degree front, rear and chevron top cocking serrations enhance gun manipulation. Machined from forged heat treated 416 stainless for long lasting performance. Compatible with 3rd Generation Glock 17 frames. Includes factory Glock striker channel liner. We recommend that a Glock Armorer install and check your parts before use as well as a 200 round break in. 100% made in specialized factories

  • Alpha Shooting Sports ALPHA Marksman V4 Slide for Glock 17 Nitride

    Upgrading your handgun has never been easier than with an Alpha Shooting Sports ALPHA Marksman Slide Glock. These Pistol Slides & Slide Parts from the people at Alpha Shooting Sports are QPQ Nitride treated for erosion resistance and increased wear and tear. With increased responsiveness and reduced weight the skeletonized pocket patterns on the Alpha Shooting Sports V4 Slide Glock are both aesthetically pleasing and functional. Modifying your firearm melds fun and functionality with an Alpha Shooting Sports 17 Slide Glock.

  • Rock Slide USA Upper for Glock 17 Gen3 9mm RS1FS9 RMR Black

    Rock Slide USA Pistol Stripped Upper 9mm, Gen3. Compatible with Glock 17/22/31 Lowers. Black Cerakote finish. RMR Cut for Trijicon optic. Takes standard Glock 17 internal parts, sights, and barrels.

  • Lone Wolf AlphaWolf Glock 17/19/34 Gen3 23 Series Slide Stainless

    Features:
    Bead blasted finish
    Made from 17-4 PH1150 stainless steel
    Fits Gen3 frames
    Included Accessories:
    Internal parts not included.
    Barrel not included.
    Sights not included
    (OEM sights do not fit on the curvature of the slide)

  • Statement Defense Overbite Glock Slide w/Trijicon RMR Optic & Window Cut Glock 17 & Glock 19

    The Overbite is our trademark slide design. It was created with the specific goal to reduce weight, increase functionality and improve accuracy all without reducing reliability. Aggressive front serrations cover the front half of the slide giving you a positive grip in nearly any condition when you rack the gun. The Overbite slide is available with or without windows depending on your preferences. The reduced weight of the slide gives you the ability to shoot longer and maintain your accuracy during repetitive shots.

  • Rival Arms Precision Slide RMR Ready Glock 19 Gen3 / 17 Model Gen3 Black

    Match-grade precision upgrade slide. Recessed slide cuts for compatibility with RMR or other optics. CNC-machined from 17-4PH stainless steel billet for superior corrosion resistance and durability. Quench-Polish-Quench (QPQ) thermo-chemical case hardened to resist normal wear and tear even in the harshest conditions. Front and rear serrations for easy slide manipulation. Three window cuts for more efficient cooling and airflow. Individually hand-inspected for accuracy. No gunsmith required. Limited lifetime warranty

  • Grey Ghost Precision Glock 17 & Glock 19 Version 3 Pistol Slide w/ RMR-DP Pro Cut Black

    All Grey Ghost Precision Slides are stripped slides. They are machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide. They are Black Nitride coated inside and out. New dual optic cutout compatible with Leupold DeltaPoint Pro or Trijicon RMR with supplied shim plate (correct length screws included). “Glock” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Grey Ghost Precision is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

  • Bishop Defense Glock 17 Gen3 Pistol Slide 5 Color Options

    Bishop Defense slides are designed and made in specialized factories to exacting standards. We currently offer three tiers to suite all needs and budgets.

  • Brownells - Iron Sight Slide for Glock 17 Gen3 Black

    The Foundation for a Superb D.I.Y. Pistol – Ergonomically Enhanced for Excellent Control

    Our Iron Sight Slide for Glock 17® Gen3 enables you to build a custom Glock®-style pistol – or rebuild an old one – with a slide that sports distinctive customized cocking serrations. The unique front serrations aid in manipulating the slide under stress, especially for quick chamber checks AND for clearing the occasional jam. Both the front and rear serrations are cut to the same depth as the Glock® factory slide serrations to ensure no loss in overall slide rigidity. The top edges and the front around the muzzle area are chamfered to reduce the risk of snagging on clothing and to make holstering the pistol easier.

  • Brownells - RMR Cut Slide for Glock 17 Gen3 Available in 4 Colors

    Optic-Ready, Ergonomically Enhanced Slide With a Bundle of Custom Features

    Our RMR Slide for Glock® 17 Gen3 pistols features distinctive, wraparound front cocking serrations that aid in manipulating the slide to check the chamber or clear a jam. (OK, we’ll admit it: the serrations just look cool, too.) It also comes with a pre-cut slot for easy, secure mounting of a Trijicon RMR or Holosun red dot sight. All RMR Slides also have standard Glock® factory front and rear sight dovetails for “iron” backup sights. To get proper co-witnessing with the RMR, you will need to also install suppressor-height iron sights.

  • MDX Arms Alpha Sports V4 Marksman Gen3. G34 Stripped Slide Glock 17/34
    • Featuring added functionality with optic mounting capability & enhanced slide serrations
    • QPQ Nitrided for improved wear & corrosion resistance
    • Compatible with Gen3 full size G17, G34 & P80 PF940V2 frames
    • Works with 9mm Glock internals
    • Slide machined 17-4 hardened Stainless steel for long lasting performance.
    • Machined to accept Trijicon RMR/SRO & Holosun 507 red dot optics.
    • Professional gunsmith assembly recommended.
    • Comes with the channel liner installed
    • Stripped slide, internals not included
  • MDX Arms G17 V2 RMR Cut Stripped Slide Glock 17/19 PF940Cv1 Gen1-3
    • 416R Stainless Steel, Cerakoted in Black
    • Heat Treated to 41-44 on the Rockwell C scale
    • Fits Glock Gen 1-3, Polymer80 PF940Cv1 Compact G19
    • Front & Rear Serrations
    • Pre-Cut for Trijicon RMR mounting slot, plus factory front and rear sights cuts (6-32 Screw Thread Pitch)
    • Will also fit the Holosun HE508T, HS507C, & HS407
    • Made in the USA
    • Pre-installed with Channel Liner
    • SIGHTS included
    • RMR Plate Covers not included
  • MDX Arms G17 V2R (Non RMR) Stripped Slide Glock 17
    • Machined from corrosion-resistant 614R Stainless Steel, Cerakoted in Black and Bronze
    • 9mm Slide
    • Heat Treated to 41-44 on the Rockwell C scale
    • Fits Glock Gen 1-3, Polymer80 PF940V2 Full Size G17
    • Front & Rear Serrations _ No RMR Cut
    • Sights *OPTIONAL*
    • Made in the USA
    • Pre-installed with Channel Liner
  • MDX Arms Glock 17 LF17 Stripped Slide Gen 1-3, Polymer80 PF940v2
    • 416R Stainless Steel, Cerakoted
    • Heat Treated to 37-44 on the Rockwell C scale
    • Fits Glock Gen 1-3, Polymer80 PF940v2 Full Size G17
    • Front & Rear Serrations with Side and Top Ports
    • Pre-Cut for Trijicon RMR mounting slot, plus factory front and rear sights cuts (6-32 Screw Thread Pitch)
    • Will also fit the Holosun HE508T, HS507C, & HS407
    • Made in the USA
    • Pre-installed with Channel Liner
    • RMR Plate Covers not included
    • Sights Not Included
  • MDX Arms Glock 17 V2 with RMR Cut Build Kit - No Frame

    Build Your Own Kit Includes: 

    • MDX G17 V2 9mm Slide with RMR Cut (6-32 Screw Thread Pitch)
    • Polymer Front and Rear Sights
    • Complete Slide Parts Kit with Guide Rod (Channel Liner Installed)
    • G17 Non Threaded Barrel in Stainless Steel or Black Nitride
    • RMR Plate Not Included
    • Compatible with Glock G17/Polymer80 PF940v2 Frame

    Optional:

    • Threaded Barrel in Stainless Steel, Black Nitride, TiN
    • Lower Parts Kit (LPK)
  • MDX Arms Glock 17 V2R Non RMR Cut Build Kit - No Frame

    Build Your Own Kit Includes: 

    • MDX G17 V2R 9mm Slide
    • Polymer Front and Rear Sights
    • Complete Slide Parts Kit with Guide Rod (Channel Liner Installed)
    • G17 Non Threaded Barrel in Stainless Steel or Black Nitride
    • Compatible with Glock G17/Polymer80 PF940v2 Frame

    Optional:

    • Threaded Barrel in Stainless Steel or Black Nitride
    • Lower Parts Kit (LPK)
  • MDX Arms Glock 17/ 19 V2 RMR Cut Stripped Slide Gen 1-3, Polymer80 PF940Cv1 Compact
    • 416R Stainless Steel, Cerakoted in Black
    • Heat Treated to 41-44 on the Rockwell C scale
    • Fits Glock Gen 1-3, Polymer80 PF940Cv1 Compact G19
    • Front & Rear Serrations
    • Pre-Cut for Trijicon RMR mounting slot, plus factory front and rear sights cuts (6-32 Screw Thread Pitch)
    • Will also fit the Holosun HE508T, HS507C, & HS407
    • Made in the USA
    • Pre-installed with Channel Liner
    • SIGHTS included
    • RMR Plate Covers not included
  • MDX Arms V1 Complete Slides - Glock 17 with 5 Color Options

    MDX Arms Complete V1 Slide for G17. Fits Polymer80 PF940V2

    Heat Treated 416 Stainless Steel, Cerakoted in Black, FDE, Tungsten Gray and Burnt Bronze
    Fits Glock Gen 1-3, Polymer80 PF940v2
    Rear Serrations
    OEM Front and Rear Sights – Optional *if available*
    MDX Slide Parts Kit – Not installed
    Match Grade Barrels in Stainless Steel Threaded and Non Threaded; Black Nitride Thread and Non-Threaded
    Guide Rod
    Made in the USA
    Due to different tolerances on frames and slides, some might require break-in period.

  • MDX Arms V1 Stripped Slides - Glock 17 with 5 Color Options

    MDX Arms V1 (Rear Serration) Stripped Slides with Pre-Installed Channel Liner

    416R Stainless Steel, Heat Treated, Available in Cerakoted Black, FDE, Tungsten Gray and Burnt Bronze
    Made in the USA
    Fits Gen1-3
    Fits Polymer80
    Deep Rear Serrations
    Pre-installed Channel Liner
    Dove Tail Rear Sight
    OEM SIGHTS NOT INCLUDED

  • MDX Arms Tri Port Stripped Stripped Slides Glock 17 with 4 Color Options

    Heat Treated 416 Stainless Steel
    Fits Glock Gen 1-3
    Fits Polymer80 PF940V2
    Front & Rear Sight Cuts
    Rear Serrations
    RMR Cut
    Side and Top Porting
    Pre-installed Channel Linear
    Made in the USA
    OEM Sights NOT INCLUDED
    Does not come with RMR Plate Cover

  • Brownells - RMR Cut Slide for Glock 17 Gen3 Bronze

    Optic-Ready, Ergonomically Enhanced Slide With a Bundle of Custom Features

    Our RMR Slide for Glock® 17 Gen3 pistols features distinctive, wraparound front cocking serrations that aid in manipulating the slide to check the chamber or clear a jam. (OK, we’ll admit it: the serrations just look cool, too.) It also comes with a pre-cut slot for easy, secure mounting of a Trijicon RMR or Holosun red dot sight. All RMR Slides also have standard Glock® factory front and rear sight dovetails for “iron” backup sights. To get proper co-witnessing with the RMR, you will need to also install suppressor-height iron sights.

  • Brownells Acro Cut Slide For Glock 17 Gen3 9mm Black or Black Nitride

    Built-In Mount for Aimpoint Sight; Easy To Customize With Factory & Aftermarket Parts
    The Brownells Acro Cut Slide for Glock® 17 Gen3 brings the ease and convenience of our popular RMR Slides to folks who prefer to mount an Aimpoint Acro P-1 red dot sight on their pistols. This slide comes with a slot machined into the top for mounting the Acro P-1 – just screw on the sight (screws included) and… hit the range!

  • L2D Combat Catalyst Slide RMR Ready, Glock 17 Gen3 Many Color Options

    Enhance your handgun’s performance and accuracy by upgrading your OEM slide to this L2D Combat Catalyst Slide RMR Ready, Glock 17. These Pistol Slides & Slide Parts developed by L2D Combat feature stainless steel construction with DLC (diamond-like carbon) coatings that improve corrosion resistance, hardness, and self-lubrication. The L2D Combat G17 Catalyst Slide RMR Ready includes mounting hardware for easy drop-in installation. Step up your shot performance and precision with the L2D Combat Glock 17 Catalyst Pistol Slide RMR Ready.

  • Brownells Blank Slide For Glock 17 Gen3 9mm Stainless

    A “Blank Canvas” for Your Next Custom Pistol Masterpiece
    Brownells Blank Slides for Glock® pistols come with the exterior left smooth and featureless so you can customize it exactly the way you want it. Add cocking serrations, an optic mounting slot, and cosmetic flourishes to make it entirely your own. (Yes, you will need to bring some machining skills to the table!)

  • Elite Weaponry Glock 17 GEN 1 2 3 9mm RMR Cut Slide with Black Cerakote

    Gen 3 Compatible
    Fits trijicon sights and also holosun sights as they are the same footprint
    Machined of 416R Heat Treated Stainless Steel
    Custom Cerakote Coating
    Custom Top & Side Cuts with Rear Cocking Serrations
    No Internal Parts Included
    Trijicon RMR Cut
    Accepts standard Glock G17 sights (not included). Hand fitting may be required.
    Works with polymer 80

  • Elite Weaponry Glock 17 GEN 1 2 3 9mm RMR Cut Slide with Blue Titanium Cerakote

    Gen 3 Compatible
    Fits trijicon sights and also holosun sights as they are the same footprint
    Machined of 416R Heat Treated Stainless Steel
    Custom Cerakote Coating
    Custom Top & Side Cuts with Rear Cocking Serrations
    No Internal Parts Included
    Trijicon RMR Cut
    Accepts standard Glock G17 sights (not included). Hand fitting may be required.
    Works with polymer 80

  • Patriot Ordnance Factory Stainless Steel G-Series Slide for Glock 19 Gen3 143

    There is no doubt Glock pistols are one of the most durable handguns around, but aesthetically they leave much to be desired. A gentleman of times gone by appreciates a reliable tool. He also favors a touch of class and uniqueness to his tools. The G-Series slides turn your Glock into a pistol suitable for any gentleman with a flare of patriotism and independence.

    Features:

    – Nitride Heat Treated for maximum strength and corrosion resistance
    – Machined from 17-4 Stainless Steel
    – Trijicon RMR red dot plate with cover and mounting hardware

    Includes:

    – Red Dot Optic Plate
    – Hardware

    Specifications:

    – Fits: Glock P17 Gen4

  • Killer Innovations Velocity Glock 17 Gen3 Slide Gray or Black

    Our new Velocity Glock Slide Enhanced Grip Feature cuts will change the way you rack your firearm. E.G.F. cuts provide a positive wall that you can push against when racking your slide instead of relying only on traditional serration cuts. E.G.F. cuts are located at the front and back of our slide, so however you prefer to rack your firearm, a perfect grip is always there.

  • MDX Arms Tri Port Complete Slides Glock 17 with 4 Color Options

    MDX Arms Complete Custom Triport Slide for G17. Fits Polymer80 PF940V2

    416 Stainless Steel, Cerakoted in Black, FDE, Tungsten Gray and Burnt Bronze
    Heat Treated to 41-44RS
    Fits Glock Gen 1-3, Polymer80 PF940V2
    Rear Serrations
    RMR/Holosun/Swampfox Optic Cut
    Top and Side Ports
    Channel Linear Installed
    OEM Front and Rear Sights – Not Installed *optional*
    Slide Parts Kit – Not Installed
    Match Grade Barrels in Stainless Steel Threaded and Non Threaded; Black Nitride Thread and Non-Threaded
    Guide Rod
    Made in the USA
    RMR Plate Cover Not Included but Optional*

  • Primary Machine Glock 17 Gen 3 Slide w/ UCC V3 Cut

    Includes all internals and plain black steel sights as well as a primary machine billet aluminum back plate. (No guide rod or barrel)

    All slides come Trijicon RMR ready with a RMR cover plate coated to match your slide.

  • TRYBE Defense Glock 17 Pistol Slide
    • Constructed from 416R Stainless Steel hardened to 42-45 HRC after being heat treated
    • Aggressive grippy design and multiple windows
    • The RMR cut slides will also take a Trijicon SRO, Holosun 507C, or a Swampfox Kingslayer. The Viper cut slides will fit a Burris Fastfire II red dot. The DeltaPoint Pro cut Slides will also take a Sig Romeo1 PRO, Sig Romeo Zero, JPoint, Shield RMS, or RMSc.
  • Voodoo Innovations VDI Stripped Slide - Enforcer - Glock 17

    The VooDoo Innovations Glock 9mm Slide Assembly is designed as an improved drop-in fit for the Glock. The VDI Slide is profiled and lightened to reduce recipricol mass and decrease felt recoil. Our VDI Slides are cut from stainless steel with enhanced front and rear cocking serrations for improved manipulation and improved slide geometry to draw your eye to the front sight. Finished in Voodoo Innovations LifeCoat process. The Enforcer Model includes Micro Red Dot Relief Cut with Cover Plate. This is a STRIPPED slide compatible with all factory Glock 17 internals, barrels, and sights

  • ZEV Technologies Duty Stripped Slide RMR Cut For Glock 17 Gen 3 Black

    The Duty slides feature the same worksmanship and quality that ZEV is known for with a functionally driven design and utilitarian coating for the no-nonsense shooter who is looking to complete a new frame build or to enhance the functionality of their Glock. The black nitride finish provides a durable coating and the patented ZEV RMR cut enables the use of red dot sights using an RMR installation footprint. We’ve reduced the cost, but not the quality.

  • Rock Slide USA 9mm Glock 17, 22 and 31 Gen3 Slide Upper RMR with Cover Plate Black

    Rock Slide USA Pistol Stripped Upper 9mm, Gen3. Compatible with Glock 17/22/31 Lowers. Black Cerakote finish. RMR Cut for Trijicon optic. Comes with cover plate installed. Takes standard Glock 17 internal parts, sights, and barrels.

  • TacFire Glock 17 Slide w/ RMR Cut & Cover Plate 9mm, Gen 3 Graphite Black
    • Gen 3 Compatible
    • Fits Model 17/22/31 frames
    • Accepts Polymer80 frames
    • Machined from 416R Stainless steel
    • Cerakoted Graphite Black
    • Machined for precise fitment of a Trijicon RMR
    • Slide Cover plate and screws included
    • Channel liner not installed or included
  • ZEV Technologies Z17 Glock 17 Citadel Stripped Slide w/RMR Plate 6 Options Available

    A positive grip, as well as channels on the top of the slide to reduce glare. No matter your slide grip location preference during manipulation, press checks, or malfunction clearing drills, the angled serrations keep your hand from slipping off the slide by naturally moving your hand downward and on to the slide when pulling back, whether wearing gloves or not.

    Our stainless steel slides are designed to improve accuracy and performance. They are manufactured in our state-of-the-art manufacturing facility from a single billet of 17-4 stainless steel to tighter tolerances than factory slides for increased consistency in barrel lockup which improves accuracy.

    All ZEV slides have our patented optic cut which features posts allowing for more thread area keeping your optic securely mounted to your slide. ZEV slides weigh less than factory slides, therefore reduce reciprocating weight, which reduces fatigue and allows for faster shot follow-up placement.

  • Primary Machine Glock 17 Gen 3 Slide w/ UCC V1 Cut Many Color Options

    Includes all internals and plain black steel sights as well as a primary machine billet aluminum back plate. (No guide rod or barrel)

    All slides come Trijicon RMR ready with a RMR cover plate coated to match your slide.

  • Steel City Arsenal Ultralight Slide for Glock 17 Gen3 Armor Black RMR Cut Polymer 80

    Steel City Arsenal Stripped Slide
    For Generation 1-3 Glock 17 9mm or Poly 80 Builds
    Includes:
    416 Stainless Slide
    New Channel Liner Installed
    Matching RMR Cover Plate
    Mounting Screws for Cover Plate
    Mounting Screws for RMR
    Cerakote Elite Blackout Finish